Growatt WIT29.9-50K-XHU handleiding
Handleiding
Je bekijkt pagina 5 van 130
1 Notes on this manual
1.1 Introduction
This manual is intended to introduce the WIT 29.9-50K-XHU Hybrid Inverters
manufactured by Shenzhen Growatt New Energy Co., Ltd. (hereinafter referred to
as Growatt) in terms of their installation, operation, commissioning, maintenance
and troubleshooting. Please read this manual carefully before using the product,
and keep it in a convenient place for further reference. The content of this manual
is continually reviewed and amended, where necessary. Growatt reserves the
right to make changes to the material at any time and without notice.
1.2 Target Group
This document is intended for qualified technicians. Only qualified and well-
trained technicians are allowed to install and operate the WIT inverter. Should
any questions arise during installation, you can visit en.growatt.com to leave a
message, or call our 24-hour service hotline at +86 755 2747 1942.
1.3 Product Range
he WIT 29.9-50K-XHU (AC 380V/400V) inverters offering five power options:
29.9kW, 30kW, 36kW, 40kW, and 50kW. In total, there are 5 products available in
this series. This manual is valid for the following models:
WIT 29.9K-XHU
3-Phase Hybrid Inverter with UPS function
WIT 30K-XHU
WIT 36K-XHU
WIT 40K-XHU
WIT 50K-XHU
Table 1.1 WIT 29.9-50K-XHU series model introduction
Safety Precautions 2
2.1 Safety Instructions
6) Before operating the WIT Inverter in on-grid mode, ensure that you have
obtained any permission needed from the local grid operator.
5) Only designated personnel are permitted to perform maintenance on the
inverter.
1) Please read this manual carefully before installation. Damages caused by
failure to follow the instructions in the manual are beyond the warranty scope.
4) Ensure that all electrical connections comply with local electrical standards.
3) During installation, please do not touch other parts inside the equipment other
than the wiring terminals.
2) Only qualified and trained electrical technicians are allowed to perform
operations on the WIT Inverter.
Transportation:
Installation:
Note:
“WIT” refers to the product name. “29.9-50K” refers to the power range.
WARNING
NOTICE
DANGER
WARNING
21
Ÿ Risk of injury when lifting the WIT Inverter, or injury caused by a
falling inverter as it is heavy. Please transport and lift the
inverter carefully.
Ÿ Please read this manual carefully before installation.
Damages caused by failure to observe instructions specified in
this manual are not covered under any warranty.
Ÿ Do not connect any cables before installation.
Ÿ Please observe the installation instructions specified in this
manual, including the installation environment and clearance
requirements.
Ÿ Please read the installation instructions and safety
precautions carefully before installation.
Ÿ Install the WIT Inverter in a dry and well-ventilated location;
otherwise, performance de-rate may be initiated due to
excessive temperature.
Bekijk gratis de handleiding van Growatt WIT29.9-50K-XHU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | WIT29.9-50K-XHU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16744 MB |
