Growatt WIT29.9-50K-XHU handleiding
Handleiding
Je bekijkt pagina 122 van 130
Error Code
Description
Suggestion
Bat Reversed
Battery terminals
reversed
1. Check if the battery terminals are
reversely connected.
2. If the error message persists, please
contact Growatt support.
Error 506
Battery open-
circuited
1. Check the wiring of the battery
terminals.
2. If the error message persists, please
contact Growatt support.
Error 507
Battery overload
protection
2. If the error message persists, please
contact Growatt support.
1. Check if the power of the load
exceeds the battery rated discharge
power.
Error 508
BUS2 Volt Abnormal
1. Restart the inverter.
2. If the error message persists, please
contact Growatt support.
Error 509
BAT Charge OCP
(Overcurrent
Protection)
2. If the error message persists, please
contact Growatt support.
1. Check if the PV voltage is oversized.
Error 510
BAT Discharge OCP
(Overcurrent
Protection)
1. Check if the battery discharge current
configuration is proper.
2. If the error message persists, please
contact Growatt support.
Error 511
BAT soft start failed
1. Restart the inverter.
2. If the error message persists, please
contact Growatt support.
EPS Output Short
Off-grid output
short-circuited
2. If the error message persists, please
contact Growatt support.
1. Restart the inverter.
Error 601
Off-grid BUS Volt
Low
2. If the error message persists, please
contact Growatt support.
1. Check if the battery is working
properly or the battery experiences
capacity loss.
Error 602
Abnormal Volt at the
off-grid terminal
2. If the error message persists, please
contact Growatt support.
1. Check if a voltage is present at the AC
port.
118
117
Error Code
Description
Suggestion
Error 603
Soft start failed
2. If the error message persists, please
contact Growatt support.
1. Restart the inverter.
Error 604
Off-grid output
voltage abnormal
2. If the error message persists, please
contact Growatt support.
1. Restart the inverter.
Error 605
Balanced circuit
self-test failed
2. If the error message persists, please
contact Growatt support.
1. Restart the inverter.
Error 606
High DC component
in output voltage
1. Restart the inverter.
2. If the error message persists, please
contact Growatt support.
EPS Overload
Off-grid output
overload
2. If the error message persists, please
contact Growatt support.
1. Restart the inverter.
Error 608
Off-grid parallel
signal abnormal
1. Check if the communication cables
are properly connected.
2. If the error message persists, please
contact Growatt support.
Bekijk gratis de handleiding van Growatt WIT29.9-50K-XHU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | WIT29.9-50K-XHU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16744 MB |
