Growatt WIT29.9-50K-XHU handleiding
Handleiding
Je bekijkt pagina 116 van 130
Warning
Description
Suggestion
Warning 500
The inverter failed to
communicate with
the battery
1. Check if the battery is turned on.
2. Check if the battery is correctly and
securely connected to the inverter.
Warning 501
Battery
disconnected
2. If the error message persists, contact
Growatt support.
1. Check if the battery is properly
connected.
Warning 502
Battery voltage too
high
2. Check if the battery is correctly
connected.
1. Check if the battery voltage is within
the permissible range.
3. If the error message persists, contact
Growatt support.
Warning 503
Battery voltage too
low
2. Check if the battery is correctly
connected.
1. Check if the battery voltage is within
the permissible range.
3. If the error message persists, contact
Growatt support.
Warning 504
Battery terminals are
reversely connected
2. If the error message persists, contact
Growatt support.
1. Check if the positive and negative
terminals of the battery are reversely
connected.
Warning 505
Temperature sensor
of the lead-acid
battery is
disconnected
1. Check if the temperature sensor of
the lead-acid battery is installed or not.
2. Check if the temperature sensor is
well-connected.
3. If the error message persists, contact
Growatt support.
Warning 506
Battery temperature
is out of range
1. Check if the ambient temperature of
the battery is within the specified range.
2. If the error message persists, contact
Growatt support.
Warning 507
BMS reported a fault;
both charging and
discharging failed
1. Figure out the cause according to the
BMS error code.
2. If the error message persists, contact
Growatt support.
112111
Warning
Description
Suggestion
Warning 508
Lithium battery
overload protection
1. Check if the power of the load
exceeds the BAT rated discharge power.
2. If the error message persists, contact
Growatt support.
Warning 509
BMS communication
abnormal
1. Restart the inverter.
2. If the error message persists, contact
Growatt support.
Warning 510
BAT SPD function
abnormal
1. Check the BAT SPD after powering off
the device.
2. If the error message persists, contact
Growatt support.
Warning 601
DC component over
high in output
voltage
1. Restart the inverter.2. If the error
message persists, contact Growatt
support.
Warning 605
Off-grid bus voltage
too low
1. Check if the load power exceeds the
upper limit.
2. Restart the inverter. If the error
message persists, contact Growatt
support.
Warning 609
Balanced circuit
abnormal
2. If the error message persists, contact
Growatt support.
1. Restart the inverter.
Bekijk gratis de handleiding van Growatt WIT29.9-50K-XHU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | WIT29.9-50K-XHU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16744 MB |
