Growatt WIT 50-100KTL3-AU handleiding
Handleiding
Je bekijkt pagina 4 van 66
1 Notes on this manual
1.1 Introduction
This manual is intended to introduce the WIT 50-100K Storage/Hybrid Inverters
manufactured by Shenzhen Growatt New Energy Co.,Ltd. (hereinafter referred to as
Growatt) in terms of their installation, operation, commissioning, maintenance and
troubleshooting. Please read this manual carefully before using the product, and keep it in
a convenient place for future reference. The content of this manual is continually
reviewed and amended, where necessary. Growatt reserves the right to make changes to
the material at any time and without notice.
1.2 Target Group
This document is intended for qualified technicians. Only qualified and well-trained
technicians are allowed to install and operate the WIT inverter. Should any questions arise
during installation, you can visit www.growatt.com to leave a message, or call our 24-
hour service hotline at +86 755 2747 1942.
1
2
1.3 Product Range
The WIT 50-100K (380V/400V) Storage/Hybrid inverters consist of six models, each
offering four power classes: 50kW, 63kW, 75kW, and 100kW. In total, there are 24
products in this series. This manual is valid for the following models:
WIT 50K-A
Three-phase Storage
Inverter
WIT 50K-H
Three-phase Hybrid
Inverter
WIT 63K-A
WIT 63K-H
WIT 75K-A
WIT 75K-H
WIT 100K-A
WIT 100K-H
WIT 50K-AE
Three-phase Storage
Inverter with EPS
function
WIT 50K-HE
Three-phase Hybrid
Inverter with EPS
function
WIT 63K-AE
WIT 63K-HE
WIT 75K-AE
WIT 75K-HE
WIT 100K-AE
WIT 100K-HE
WIT 50K-AU
function
Three-phase Storage
Inverter with UPS
WIT 50K-HU
Three-phaseHybrid
Inverter with UPS
function
WIT 63K-AU
WIT 63K-HU
WIT 75K-AU
WIT 75K-HU
WIT 100K-AU
WIT 100K-HU
Table 1.1 WIT 50-100K Storage/Hybrid inverter
Safety Precautions 2
2.1 Safety Instructions
4) Ensure that all electrical connections comply with local electrical standards.
6) Before operating the WIT Inverter in on-grid mode, ensure that you have obtained any
permission needed from the local grid operator.
2) Only qualified and trained electrical technicians are allowed to perform operations on
the WIT Inverter.
3) During installation, please do not touch other parts inside the equipment other than
the wiring terminals.
1) Please read this manual carefully before installation. Damages caused by failure to
follow the instructions in the manual are beyond the warranty scope.
5) Only designated personnel are permitted to perform maintenance on the inverter.
Ÿ Risk of injury when lifting the WIT Inverter or due to a falling inverter,
as it is heavy. Please transport and lift the inverter with caution.
Ÿ Please read this manual carefully before installation. Damages
caused by failure to observe instructions specified in this manual are
not covered under any warranty.
Ÿ Do not connect any cables before installation.
Ÿ Install the WIT Inverter in a dry and well-ventilated location;
otherwise, performance de-rate may be initiated due to excessive
temperature.
Ÿ Please observe the installation instructions specified in this manual,
including the installation environment and clearance requirements.
Ÿ Please read the installation instructions and safety precautions
carefully before installation.
Transportation:
Installation:
“WIT” refers to the product name and “50-100K” indicates the power classes. The WIT
series comprises both Storage Inverter models and Hybrid Inverter models.
Note:
Ÿ High voltages may cause electric shocks and serious injury. Please do
not touch the WIT Inverter in operation.
Ÿ Before connecting cables, ensure that the DC switches of the WIT
Inverter are OFF, and turn off the switch and breaker on the AC side
and the battery side. Otherwise, high voltages may cause severe
injuries.
Ÿ It must be operated by qualified and trained electrical technicians.
Technicians should observe instructions in this manual and local
regulations.
Ÿ Do not install the inverter in potentially explosive and flammable
atmospheres.
Electrical Connections:
WARNING
NOTICE
DANGER
WARNING
DANGER
Bekijk gratis de handleiding van Growatt WIT 50-100KTL3-AU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | WIT 50-100KTL3-AU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14891 MB |
