Growatt SPH 4000-10000TL3 BH-UP handleiding

Niet gecategoriseerd

Growatt

88 pagina's

PDF beschikbaar

Handleiding

1.1 Information on this document

1.2 Target group

1.3 Product description

1 Overview

This document introduces the Growatt SPH TL3 BH-UP series inverters concerning its

functions, installation, electrical connection, commissioning and maintenance. The

content of this document is continually reviewed and amended, where necessary. Prior to

operating the inverter, read through this manual and familiarize yourself with all safety

precautions and the features of the product. Growatt reserves the right to make changes

to the material at any time and without notice in order to keep the document accurate

and up-to-date.

Only qualified electrical technicians are allowed to install Growatt SPH TL3 BH-UP inverter.

Personnel who will operate the equipment should possess the local/national required

qualifications.The SPH inverters can be paired with two types of batteries: the lithium

battery or the lead-acid battery. Customers can select the appropriate type based on their

needs. If the inverter is to be paired with the lithium battery, customers should purchase

the battery from Growatt. If the inverter is to be paired with the lead-acid battery,

customers can purchase the battery by themselves, which are easily accessible in the

market. Please beware that the corresponding operation mode should be configured

based on the battery type; otherwise, it might lead to safety hazard. Qualified electrical

technicians should read through this manual and observe all instructions to properly

install, troubleshoot and configure the SPH inverter.Should you encounter any problem

during installation, you can visit www.growatt.com and leave a message, or call our 24-

hour service hotline at +86 755 2747 1942.

Ÿ SPH 4000TL3 BH-UP

Ÿ SPH 6000TL3 BH-UP

Ÿ SPH 5000TL3 BH-UP

Ÿ SPH 7000TL3 BH-UP

Ÿ SPH 8000TL3 BH-UP

Ÿ SPH 10000TL3 BH-UP

Note: The models mentioned above are hereinafter referred to as "SPH".

Growatt SPH TL3 BH-UP inverters are designed to store energy from the PV panels and the

grid when the AC Charging function is enabled. They can also export power to the grid.

During a grid outage, the SPH TL3 BH-UP can work to supply backup power. Growatt SPH

series inverters are available in six models:

Appearance:

Figure 1.1

Position

Description

LED of status display

LCD screen

Function button

Ground point

Ventilation valve

EPS: EPS output (for off-grid connection)

RSD (professionals only)

GRID: AC Grid (for on-grid connection)

485-3: RS485 communication port (reserved)

485-2: RS485 communication port for Meter 2 (reserved)

NC (Not Connected)

DRMS: RJ45 connector for DRMs (demand response modes)

Meter: RS485 communication port for Meter 1

CAN: CAN port to communicate with the lithium battery

USB: USB port

PV switch

PV input

BAT: Battery terminal

Dry contact

485-1: RS485 communication port for Meter 2 (reserved)

Bekijk gratis de handleiding van Growatt SPH 4000-10000TL3 BH-UP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.