Growatt SPF 6000ES Plus handleiding
Handleiding
Je bekijkt pagina 14 van 44
12
PV Module Selection:
When selecting proper PV modules, please be sure to consider below parameters:
1.
Open circuit Voltage (Voc) of PV modules not exceeds max. PV array open circuit voltage of inverter.
2.
Open circuit Voltage (Voc) of PV modules should be higher than start-up voltage.
Please follow below steps to implement PV module connection:
1.Remove insulation sleeve 10 mm for positive and negative conductors.
2.Insert PV panel positive and negative cables into MC4 terminal, then connect positive pole(+)of connection
cable to positive pole(+)of PV input connector, connect negative pole(-)of connection cable to negative pole(-)
of PV input connector.
3.Make sure the wires are securely connected.
Final Assembly
After connecting all wiring, please put bottom cover back by screwing four screws as shown below.
Communication Connection
Please use supplied communication cable to connect to inverter and PC. Follow on-screen instruction to install
the monitoring software. For the detailed software operation, please check user manual of software. The
monitoring software is downloadable from our website www.ginverter.com.
INVERTER MODEL
SPF 6000 ES PLUS
Max. PV Array Open Circuit Voltage
500Vdc
Start-up Voltage
150Vdc
PV Array MPPT Voltage Range
120Vdc~450Vdc
Bekijk gratis de handleiding van Growatt SPF 6000ES Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | SPF 6000ES Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6984 MB |
