Growatt MIN 3-11.4KTL-XH-US handleiding
Handleiding
Je bekijkt pagina 11 van 81
8
Ø Persons with limited physical or mental abilities may only work with
the Growatt inverter following proper instruction and under constant
supervision. Children are forbidden to play with the Growatt inverter.
Must keep the Growatt inverter away from children.
•Do not touch damaged inverters.
Ø The components in the inverter are live. Touching live components can
result in serious injury or death.
•Do not open the inverter except the wire box by qualified persons.
•There is residual voltage in the inverter. The inverter takes 20 minutes
to discharge.
•Wait 20 minutes before you open the wire box.
•Electrical installation, repairs and conversions may only be carried out
by electrically qualified persons.
Ø Danger to life due to high voltages in the inverter.
Ø Make all electrical connections (e.g. conductor termination, fuses, PE
connection, etc.) in accordance with prevailing regulations. When
working with the inverter powered on, adhere to all prevailing safety
regulations to minimize risk of accidents.
Ø Systems with inverters typically require additional control (e.g.,
switches, disconnects) or protective devices (e.g., fusing circuit
breakers) depending upon the prevailing safety rules.
2.7.2 Electrical Connection Warnings
2.8 Operation Warnings
3.1 Inverter Overview
3.2 Information of Label
Ø Ensure all covers and doors are closed and secure duringoperation.
Ø Anytime the inverter has been disconnected from the power network,
use extreme caution as some components can retain charge sufficient to
create a shock hazard; to minimize occurrence of such conditions,
comply with all corresponding safety symbols and markings present on
the unit and in this manual.
All operations regarding transport, installation and start-up, including
maintenance must be operated by qualified, trained personnel and in
compliance with all prevailing codes and regulations.
Ø Although designed to meet all safety requirements, some parts and
surfaces of Inverter are still hot during operation. To reduce the risk of
injury, do not touch the heat sink at the back of the PV-Inverter or nearby
surfaces while Inverter is operating.
Ø Incorrect sizing of the PV plant may result in voltages being present
which could destroy the inverter. The Shinephone will read the error
message 'PV-Over voltage'. Turn the rotary switch of the DC Disconnect
to the Off position immediately. Contact installer.
WARNING
DANGER
WARNING
(1)Host panel (2)LED indicators (3)Wiring box cover
(4)Battery wake-up button (5)Mounting bracket (6)Heat sink
(7)DC switch (8)PV input port (9)Battery input port
(10)Antenna port 1 (11)Antenna port 2 (12)Comm. port 1
(13)Comm. port 2
1 2 3
4
5
6
8 9 10
11
12
13
7
Ø The type of product (Type/Model)
Ø Device-specific characteristics
The labels provide technical information of the inverter.Youinverter. You can identify the
inverter by the label,itlabel; it is located on the enclosure of the
inverter.Differentinverter. Different type labels can be found on the MIN TL-XH US
models.
Ø Specifications of the inverter
Ø AFCI certificates
Ø Serial number
Ø Warning
Ø Requirements of cable & torque
Product Description 3
Fig 3.1
7
3000-7600
8200-11400
14
15
(14)Backup output port
(15)AC output port
6
5
4
Bekijk gratis de handleiding van Growatt MIN 3-11.4KTL-XH-US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MIN 3-11.4KTL-XH-US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8539 MB |
