Growatt MID 30-50KTL3-X2 handleiding
Handleiding
Je bekijkt pagina 14 van 28
21 22
6.4 Connect the signal cable
The MID series inverter has an 16-Pin signal connector except Vietnam models.The client
signal line port is as follows:
1.Strip the cable 10mm through the waterproof gland, thread sleeve, and tighten the
screws.
Fig 6.7
Fig 6.8
1
2
3
4
B just for Vietnam models
B just for Vietnam models
A
A
Fig 6.9
Fig 6.10
Fig 6.11
Fig 6.12
2. Push the threaded sleeve into the socket and tighten the waterproof gland.
3.Connect the client to the inverter plug until both are tightly locked on the inverter.
Remove the signal connector
1.Press down the fastener and pull it out of the inverter.
the inverter side
2. Insert the H-shaped tool and pull it out of the socket.
Click!
Click!
Inverter side
Bekijk gratis de handleiding van Growatt MID 30-50KTL3-X2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 30-50KTL3-X2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4972 MB |
