Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 30 van 55
5.11.2 Configuration
Step 1. Setting the communication address of the inverter
Ÿ The communication address ranges from 1 to 254.
Information
After the inverter is powered on, you can set the inverter communication address
through the RS485 or the USB to WiFi module. When multiple inverters are connected
in parallel through RS485 with hand-in-hand communication, each inverter should be
configured with a different communication address. Please refer to Section 8.7 for
instructions on setting the inverter communication address.
Step 2. Configuring the ShineMaster-X/SEM-X
The SEM-X box comprises the ShineMaster-X and other components. Scan the QR
code below to obtain the SEM-X User Manual for guidance on configuring the SEM-X
and ShineMaster-X (in Chapter 3).
5.12 Connecting the monitoring module
Ÿ For a system with a signal inverter, you can install a
datalogger/ShineMaster/SEM-X for remote monitoring. For
details about the ShineMaster/SEM-X, please refer to Section
5.11.2.
Ÿ The datalogger is an optional accessory and should be purchased
by the users separately.
Information
With a datalogger connected, the MID TL3-XH inverter can be monitored via the cloud
server and the APP.
Recommended datalogger model:
No.
Brand
Recommended model
Applicable system
1
GROWATT
Ÿ ShineWiFi-X
A single inverter
2
GROWATT
Ÿ ShineLan-X
A single inverter
3
GROWATT
Ÿ ShineLink-X
A single inverter
4
GROWATT
Ÿ ShineMaster-X
A single inverter or
multiple inverters
connected in parallel
4847
【SEM-X Configuration Guide】
Table 5-10 Datalogger specifications
5.12.1 Installing and removing the datalogger
5.12.2 Configuring the datalogger
You can access the configuration guide of the following datalogger models by scan the
corresponding QR code.
Datalogger
ShineWiFi-X Configuration Guide
ShineLan-X Configuration Guide
ShineLink-X Configuration Guide
Figure 5-21 Installing and removing the datalogger
Table5-11 Datalogger configuration guide
Ti
g
ht
en
Lo
osen
1
2
3
Loos
en
T
i
g
ht
en
2
Lo
osen
Tigh
ten
1
T
i
ghten
Loos
e
n
3
Install
Remove
0.8~1.1 N·m
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
