Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 23 van 55
5.7.1 COM port definition
PIN
Definition
Function
PIN
Definition
Function
1
Dry_12V
Dry contact: the power
supply should not be
greater than 2W
16
DRM0/CO
M
/
2
Dry_GND
17
/
/
3
RS485A1
Parallel
communication port
18
/
/
4
RS485B1
19
/
/
5
RS485A3
Meter communication
port
20
/
/
6
RS485B3
21
BOX.EN+
SYN detection
signal port
7
RS485A2
Battery 1
communication port
22
BOX.EN-
8
RS485B2
23
RS485A4
SYN
communication
port
9
WP+
Battery 1 wakeup
signal
24
RS485B4
10
WP-
25
/
/
11
DRM1/5
Relay contact 1 input
26
/
/
12
DRM2/6
Relay contact 2 input
27
RS485A2
Battery 2
communication
port
13
DRM3/7
Relay contact 3 input
28
RS485B2
14
DRM4/8
Relay contact 4 input
29
WP+
Battery 2 wakeup
signal
15
REF/GEN
GND
30
WP-
5.7.2 Connecting the 30-pin COM connector
Strip the cable to a length of 10 mm then pass it through the waterproof connector cover
and the threaded sleeve. Crimp the corresponding terminal provided in the accessory
bag onto the communication cable, and plug in the 30-pin communication connector.
3433
Figure 5-10 30-pin COM port
Table 5-3 Pin definition of the COM port
Figure 5-11 Connecting the 30-pin COM connector
Ÿ If only Battery 1 is connected, the communication cable should
be connected to PINs 7, 8, 9 and 10; otherwise, the battery
would fail to operate normally.
NOTICE
2
3
1
5
4
6
ⅢⅡⅠ
× 4
insert
Cable crimping is completed
5.8 Connecting the battery (optional)
Ÿ When the system is in operation, do not connect or disconnect
the power cables between the battery and the inverter.
Ÿ Ensure that the battery is properly connected to the inverter.
Device damage caused by incorrect wiring is not cover under
the warranty.
Ÿ Before connecting the battery, ensure that the DC SWITCH on
the battery is set to the OFF position.
Ÿ Personnel who have not received training are not permitted to
perform electrical connections.
Ÿ Cables are differentiated with different colors, please follow the
color convention when wiring cables.
DANGER
WARNING
NOTICE
The MID inverter features two independent BAT inputs with the BAT+/BAT-/BATN
terminals.
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
