Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 18 van 55
4.3 Wall-mounted installation
4.3.1 Installing the mounting bracket
Ÿ Operation personnel should wear goggles and dust masks when
drilling holes to prevent dust inhalation or contact with eyes.
Ÿ After drilling holes, remove all the dust and debris inside and
around the holes using a vacuum. Then, measure the hole
spacing. For holes with inaccurate positons, drill holes again.
Ÿ Ensure that the mounting bracket is level with the cement wall.
Otherwise, the inverter cannot be mounted on the wall securely.
DANGER
WARNING
Step 1. Determining the hole position
Place the level at the predetermined installation position, then place the bracket above
the level and mark the hole positions using the marker.
Step 2. Drilling holes
Drill holes on the marked positions with a Φ10 mm drill bit to a depth of 55 mm.
24
23
Figure 4-7 Wall-mounted installation
Step 3: Securing the mounting bracket
Knock the plastic expansion tube, which can be found in the accessory bag, into the
hole with a hammer. Then secure the bracket into the plastic expansion tube by
tightening the screw.
Shake the bracket with your hands to check if the bracket is securely installed.
Step 4. Verifying that the bracket is securely installed
55mm
Ф=10 mm
90
°
2
1
260 mm
5 N·m
M6
3
4.3.2 Installing the inverter
Ÿ Electrical connections can only be performed after the securing
screws are tightened.
Ÿ Prior to installing the inverter, ensure that the mounting bracket is
securely installed.
Information
Step 1. Hang the inverter onto the bracket, carefully adjusting its position to ensure it is
balanced on the wall bracket.
Step 2. Secure the inverter to the bracket using M5 screws.
Figure 4-8 Moving the inverter by two persons
Figure 4-9 Securing the screw onto the inverter
5N·m
M6
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
