Growatt MAX 185-253KTL3-X HV handleiding
Handleiding
Je bekijkt pagina 65 van 77
Warning
Description
Suggestion
Warning 405
Firmware version abnormal
1.Restart inverter.
2.Contact Growatt.
Warning 406
Boost module error
1.Restart inverter.
2.Contact Growatt.
Warning 407
Over Temperature
1.Restart inverter.
2.Contact Growatt.
Warning 408
NTC broken
1.Restart inverter.
2.Contact Growatt.
Warning 409
Reactive abnormal
1.Check if shinemaster is abnormal.
2.Contact Growatt.
Warning 410
CPU Run abnormal
1.Restart inverter.
2.If error message still exists, contact
manufacturer.
Warning 411
synchronization signal
Abnormal
1.Check the synchronizing signal is
abnormal.
2.If error message still exists, contact
manufacturer.
Warning 412
The grid-connected startup
condition of the inverter is not
met
1.Check whether the grid voltage is out
of range or whether the grid-
connected voltage setting of the
inverter is correct.
2.Check whether the PV voltage is too
high or too low.
3.Restart the inverter. If error message
still exists, contact manufacturer.
Notice: MAX 175-253KTL3-X series inverter has two external fans and five Internal fan.
If the suggestions do not work, please contact to Growatt.
9.2.2 Error
Errors codes identify a possible equipment failure, fault or incorrect inverter setting or
configuration, any or all attempts to correct or clear a fault must be performed by
qualified personnel.
Typically, the error code can be cleared once the cause or fault is removed.
Some of error code as table shows below, may indicate a fatal error and require you to
contact the supplier or Growatt for help.
Error
Description
Suggestion
Error 200
AFCI Fault
1.After shutdown,check the panel
terminal.
2.Restart inverter.
3.Contact Growatt.
Error 201
Residual I High
1.Restart inverter.
2.Contact Growatt.
Error 202
PV Voltage High
1.Immediately disconnect the DC
switch and check the voltage.
2.Contact Growatt.
Error 203
PV Isolation Low
1. After shutdown, check if the panel
shell is reliably grounded.
2. Contact Growatt.
Error 204
PV Reversed
1.After shutdown, check PV input
terminals.
2.Contact Growatt.
Error 300
AC V Outrange
1.Check grid voltage.
2.Contact Growatt.
Error 301
AC terminals reversed
1.Check AC terminals.
2.Contact Growatt.
Error 302
No AC Connection
1.After shutdown,check AC wiring.
2.Contact Growatt.
Error 303
NE abnormal
1.After shutdown,ensure that the
ground wire is reliably connected.
2.Contact Growatt.
Error 304
AC F Outrange
1.Check the frequency is in the range
of specification or not.
2.Contact Growatt.
Error 305
Output overload protected
1.Check output load,Reduce the
output power.
2.Contact Growatt.
Error 306
CT is reversed
1.Check if the CT wiring is reversed.
2.Contact Growatt.
Error 307
CT communication failed
1.Check CT communcation wiring.
2.Contact Growatt.
Error 308
Wireless CT pairing timed out
1.Pairing between machine and CT
timed out. Re-pair.
2.Contact Growatt.
61
62
Bekijk gratis de handleiding van Growatt MAX 185-253KTL3-X HV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MAX 185-253KTL3-X HV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11687 MB |
