Growatt MAX 100-150KTL3-X2 LV handleiding

Niet gecategoriseerd

Growatt

83 pagina's

PDF beschikbaar

Handleiding

Fig 5.7

Fig 5.9

Fig 5.10

1>Use the wall mount plate as a template drill holes on the wall and put in expansion

bolts.

2>Follow the following drawing put the bolt to install the wall mount plate on the wall.

Fig 5.11

Notice: Do not install inverter unless you have confirmed the wall mount plate has been

firmly installed on the wall.

1>As shown in Fig 5.8, 4-6 persons are required to lift the inverter out of the package

and move it to the installation position.

2>When you are moving the inverter, please keep the balance.

Notice: There will be front and bottom mark on the package.

D. Do not install inverter into an enclosed space like following drawing.

5.3 Moving Requirements

• The inverter is heavy, please move it with care and keep balance to avoid

personnel injury.

• Do not place the inverter with its wiring and signal terminals at the

bottom contacting with floor or any other object because the terminals

are not designed to support the weight of inverter.

WARNING

Fig 5.8

5.4 Wall Mount Bracket Installation

Before install the inverter you need install the wall mount bracket so that the inverter can

be firmly installed on the wall.

Wall mount plan:

Notice:Expansion bolt should be installed on solid walls with at least 100mm thickness.

840mm

190mm

Bekijk gratis de handleiding van Growatt MAX 100-150KTL3-X2 LV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.