Handleiding
Je bekijkt pagina 25 van 33
4.
2.
1. Remove the wire clip; connect the power con-
wall
The drain hose can't be fluctuant
2.
Hex nut diameter
Tightening torque(N m)
.
The water outlet can't be placed in water in
order to drain smoothly.
20
1/4''
3/8''
1/2''
5/8''
3/4''
15~20
30~40
45~55
60~65
70~75
Connect outdoor electric wire
the drain hose
can't raise
Step 5:
upwards.
The water outlet
can't be placed
in water
The drain hose
can't be fluctuant
The water
outlet can't be
fluctuant
U-shaped curve
Fix the power connection wire and signal con-
trol wire with wire clip (only for cooling and h-
eating unit).
Step 6:
Neaten the pipes
1.
drain hose
NOTICE
NOTICE
NOTICE
The wiring board is for reference only, please refer
to the actual one.
nection wire and signal control wire (only for
cooling and heating unit) to the wiring terminal
according to the color; fix them with screws.
After tighten the screw, pull the power cord slightly
to check if it is firm.
Never cut the power connection wire to prolong or
shorten the distance.
If the outdoor unit is higher than the wall hole,
Slant the drain hose slightly downwards.
The drain hose can't be curved, raised and
fluctuant, etc.
The through-wal height of drain hose shoul
not be higher than the outlet pipe hole of in-
door unit.
Tighten the union nu t with torque wrench
by referring to the sheet below.
The pipes should be placed along the wall, bent
reasonably and hidden possibly. Min. semidiam-
eter of bending the pipe is 10cm.
Indoor unit connection
N(1)
blue
2
black
yellow-
green
you must set a U-shaped curve in the pipe
before pipe goes into the room, in order to
prevent rain from getting into the room.
Bekijk gratis de handleiding van Gree GSC24UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GSC24UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5018 MB |
