Handleiding
Je bekijkt pagina 18 van 33
Phenomenon
Checked items before
maintenance
Soluon
Eliminate the odour
source. Clean the
filter.
Unit is operang un-
der auto mode?
Your required temp-
erature exceeds the
set temperature
range?
Voltage is too low?
Wait unl the voltage
resumes normal.
Remove obstacles.
Whether remote co-
ntroller is within the
signal rec eiving range?
Temperature can’t
be adju sted under
auto mode. Please
switch the operaon
mode if you need to
adjusemperature.
Filter is dirty? Clean the filter.
Adjust temperature to
proper range.
Is sensivity of rem-
ote controller low;
fuzzy display or no
display?
Whether remote co-
ntroller is poinng at
the receiv ing window?
S elect proper angle
and point the remote
controller at the rece-
iving window on indoor
unit.
Check the bat teries.
If th e powe r of batteries
is to o low , please rep-
lace them.
Disconnect power,
put back power, and
then turn on the unit
again.
No display when op-
erang remote cont-
roller?
Check whether rem-
ote controller appears
to be damaged. If yes,
replace it.
Take the remote con-
troller close to indoor
unit. Turn off the fluo-
rescent lamp and then
try it again.
During defrosng
under heang mode,
it may generate vapor,
which is a normal
phenomenon.
Whether there’s inte-
rference, such as
thunder, wireless
devices, etc.
Eliminate obstacles.
The noise i s the sound
of refrigeranlowing
ins ide the unit, which is
a norma l phenomenon.
Under heang mode,
indoor temperature is
reached to set temp-
erature?
This is the sound of
fricon caused by
expansion and
or
con traction of panel
or other parts due to
the change
of temp-
erature.
In order to prevent
blowing out cold air,
indoor unit will be
started aer delaying
for several minutes,
which is a normal
phenomenon.
Heang mode is
turned on just now?
Power failure?
Is plug loose?
Reinser t the plug.
Air switch trips off
or fuse is burnt out?
Wiring has malfunc-
on?
Unit has restarted
immediately aer
stopping operaon?
Wait for 3min, and
then turn on the unit
again.
Ask professional to
replace air switch or fuse.
Ask professional to
replace it.
Reset the funcon.
Whether the funcon
seng for remote
controller is correct?
Indoor temperature
and humidity is high?
13
Check items
Whether there’s od-
our source,
such as
furniture and cigare-
e, etc.
Becaus e indoor air
is cooled rapidly.
Aer a while, indoor
temperature and hu-
midity will be dec rease
and mist will dis appe
ar.
Phenomenon
Check items
Odours are
emied
Soluon
Se t tempe-
Pull out the plug.
Reins erhe plug aer
about 3min, and then
turn on the unit again.
Whether it's interfered
seve rely (such as sta-
c electricity, stable
voltag e? )
rature can’t
Set temperature
Signal receiving
range is 8m.
Whether there are
be adjusted
obstacles?
range: 16 ℃~30
℃.
General phenomenon analysis
Pl ea se c hec k be lo w ite m s before asking for
maintenan ce. If the malfuncon sll can’t be
eliminat ed, please contact local dealer or qualified
professionals.
Indoor unit
can’t re ce ive
remot e co-
ntroller’s si-
no acon.
gnal or remote
controller has
Cooling
(heang)
effect is
Set temperature is
in proper range?
Door and window
are open?
not good.
window.
Close door and
Air condi-
oner operates
abnormally
Outdo or unit
has vapor
Fluorescent lamp in
room?
Heang mode is
turned on?
“Water
Air condioner is
flowing”
turned on or turned
off just now?
noise
Air inlet or air outlet
of indoor unit is
blocked?
Aer
reaching to set
No air
emied
from indoor
unit
Air condioner is
Cracking
turned on or turned
off just now?
temperature,
indoor
unit will stop blowing
out air.
noise
Wait unl power
Air
recovery.
condioner
can’t operate
Mist is emi-
ed from
indoor unit’s
■
● Power cord is overheang or damaged.
There’s abnormal sound during operaon.
Air switch trips off frequently.
Air condioner gives off burning smell.
Indoor unit is leaking.
WARNING
Whe n belo w phenomeno n occurs, ple ase turn
off air conditioner and dis conne ct powe r imme di-
ately, an d then contact the deale r or qualified
profess iona ls for s erv ice.
Do not repair or refit the air con ditioner by you rself.
If the air condioner operates under abnormal
condions, it may cause malfuncon , electric
shock or fire hazard.
■
■
●
●
●
●
air outlet
Bekijk gratis de handleiding van Gree GSC24UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GSC24UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5018 MB |
