Handleiding
Je bekijkt pagina 15 van 33
10
button
●
●
●
●
●
●
no display
NOTE
●
By pressing this button, you can see indoor set
temperature, indoor ambient temperature or
outdoor ambient temperature on indoor unit's
display. The setting on remote controller is selected
circularly as below:
Outdoor temperature display is not available for some
models. At that time, indoor unit receives " "
signal, while it displays indoor set temperature.
It
's defaulted to display set temperature when turning
on the unit. There is no display in the remote control-
ler.
Only for the models whose indoor unit has dual-8
display.
When selecting displaying of indoor or outdoor ambi-
ent temperature , indoor temperature indicator
displays corresponding temperature and automatical-
ly turn to display set temperature after three or five
seconds.
button
Energy-saving function
Function introduction for
combination buttons
When selecting " " or no display with remote
controller, temperature indicator on indoor unit
displays set temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays indoor
ambient temperature.
When selecting " " with remote controller,
temperature indicator on indoor unit displays
outdoor ambient temperature.
Under cool or heat mode, press this button to start
up sleep function.
" " icon is displayed on remote controller. Press
this button again to cancel sleep function and " "
icon will disappear. After powered on,
sleep func-
tion off is defaulted. After the unit is turned off, the
sleep function is canceled.
In this mode, set temperature will be adjusted with
the change of time. Under fan, dry and auto
modes, this function is not available.
●
●
●
●
NOTE
8℃ heating function (Not applicable)
●
●
●
NOTE
Under heat mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off 8
℃
heating function. When this function is started up,
" " and "8℃" will be shown on remote controller,
and the air conditioner keep the heating status at
8℃. Press "TEMP" and "CLOCK" buttons simulta-
neously again to exit 8℃ heating function.
Under cooling mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner wi
ll adjust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effect.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit energy-saving function.
Under 8℃ heating function, fan speed is defaulted at
auto speed and it can
't be adjusted.
Under 8℃ heating function, set temperature can
't be
adjusted. Press "TURBO" button and the remote
controller won
't send signal.
Sleep function and 8℃ heating function can
't operate
at the same time. If 8℃ heating function has been set
under heat mode, press "SLEEP" button will cancel
8℃
heating function. If sleep function has been set under
heat mode, start up the 8℃ heating function will
cancel sleep function.
Under ℉ temperature display, the remote controller
will display 46℉ heating.
Under energy-saving function, fan speed is defaulted
at auto speed and it can
't be adjusted.
Under energy-saving function, set temperature can
't
be adjusted. Press "TURBO" button and the remote
controller won
't send signal.
Sleep function and energy-saving function can
't oper-
ate at the same time. If energy-saving function has
been set under cool mode, press "SLEEP" button will
cancel energy-saving fu
nction. If sleep function has
been set under cool mode, start up the energy-saving
function will cancel sleep function.
Bekijk gratis de handleiding van Gree GSC18UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GSC18UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5018 MB |
