Handleiding
Je bekijkt pagina 26 van 35
21
button
button
●
Clock time adopts 24-hour mode.
The interval between two operations can't exceed 5s.
Otherwise, remote controller will quit setting status.
Operation for TIMER ON/TIMER OFF is the same.
●
●
●
●
Press this button to set clock time. " " icon on
remote controller will blink. Press "▲" or "▼" button
within 5s to set clock time. Each pressing of "▲" or
"▼" button, clock time will increase or decrease 1
minute. If hold "▲" or "▼" button, 2s later, time will
change quickly. Release this button when reaching
your required time. Press "CLOCK" button to
confirm the time. " " icon stops blinking.
The quiet function can be set up in all modes; Un-
der the quiet mode,the fan speed is not available.
When quiet function is selected:
Under cooling mode: indoor fan operates at notch 4
speed. 10 minutes later or when indoor ambient tem-
perature≤28℃, indoor fan will operate at notch 2
speed or quiet mode according to the comparison
between indoor ambient temperature and set tem-
perature.
Under heating mode: indoor fan operates at notch 3
speed or quiet mode according to the comparison
between indoor ambient temperature and set tem-
perature.
Under dry, fan mode: indoor fan operates at quiet mode.
Under auto mode: the indoor fan operates at the auto
quiet mode according to actual cooling, heating or
fan mode.
The quiet function is only available for some models.
NOTE
NOTE
Press this button, the Quiet status is under the Auto
Quiet mode (display " " and "AUTO" signal ) and
Quiet mode (display " " signal) and Quiet OFF
(there is no signal of " " displayed). After powered
on, the Quiet OFF is defaulted.
controller is not used for a long time, the air condi-
tioner can be turned on or turned off by the timer
function. You are suggested to put the remote
controller at the position where the indoor unit can
receive the remote signal, which can lead to more
accurate timer.
button
Under off status, press "MODE" and "WiFi" buttons
simultaneously for 1s, WiFi module will restore
factory settings.
" " icon is displayed.
This function is only available for some models.
●
NOTE
button
When selecting " " or no display with remote con-
troller, temperature indicator on indoor unit dis-
Press this button to turn off display light on indoor
unit. " " icon on remote controller disappears.
Press this button again to turn on display light.
plays set temperature.
no display
●
By pressing this button, you can see indoor set
temperature, indoor ambient temperature or out-
door ambient temperature on indoor unit's display.
The setting on remote controller is selected circu-
larly as below:
button
Press "WiFi" button to turn on WiFi function, "WiFi"
icon will be displayed on the remote controller;
Hold "WiFi" button for 5s to turn off WiFi function
and "WiFi" icon will disappear.
UV button
●
" " function is not applied on this model.
NOTE
UV
Press this button to select your required operation function
as below:
● When selecting " " function." with remote controller,
air conditioner will turn on the UV function.
● When selecting " " or "no display" with remote
controller, air conditioner will turn off the UV function.
Bekijk gratis de handleiding van Gree GIC18UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GIC18UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5040 MB |
