Handleiding
Je bekijkt pagina 27 van 35
●
Outdoor temperature display is not available for some
models. At that time, indoor unit receives " " sign-
al, while it displays indoor set temperature.
It's defaulted to display set temperature when turning
on the unit. There is no display in the remote control-
ler.
Only for the models whose indoor unit has dual-8 dis-
play.
When selecting displaying of indoor or outdoor ambi-
ent temperature, indoor temperature indicator dis-
plays corresponding temperature and automatically
turn to display set temperature after three or five se-
conds.
●
●
●
Under energy-saving function, fan speed is defaulted
●
22
NOTE
●
8°C heating function (Not Applicable)
Under 8°C heating function, fan speed is defaulted at
auto speed and it can't be adjusted.
Under 8°C heating function, set temperature can't be ad-
justed. Press "TURBO" button and the remote con-
troller won't send signal.
Sleep function and 8°C heating function can't operate
at the same time. If 8°C heating function has been set
under heat mode, press "SLEEP" button will cancel
8°C heating function. If sleep function has been set
under heat mode, start up the 8°C heating function will
cancel sleep function.
Under °F temperature display, the remote controller will
display 46°F heating.
●
●
●
Energy-saving function
Function introduction for
combination buttons
at auto speed and it can't be adjusted.
Under
energy-saving function, set temperature can't
be adjusted. Press "TURBO" button and the remote
controller won't send signal.
Sleep function and energy-saving function can't oper-
ate at the same time. If energy-saving function has
been set under cool mode, press "SLEEP" button
will cancel energy-saving function. If sleep function
has been set under cool mode, start up the energy-
saving function will cancel sleep function.
Under heat mode, press "TEMP" and "CLOCK" but-
tons simultaneously to start up or turn off 8°C heat-
ing function. When this function is started up, " "
and "8°C" will be shown on remote controller, and
the air conditioner keep the heating status at 8°C.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit 8°C heating function.
Child lock function
Temperature display switchover function
Auto clean function
Under cooling mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner will adjust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effect.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit energy-saving function.
Under OFF status, press "▼" and "MODE" buttons
simultaneously to switch temperature display
between °C and °F.
Press "▲" and "▼" simultaneously to turn on or
turn off child lock function. When child lock func-
tion is on, " " icon is displayed on remote control-
ler. If you operate the remote controller, the " "
icon will blink three times without sending signal to
the unit.
NOTE
●
NOTE
●
Under unit off status, hold "MODE" and "FAN"
buttons simultaneously for 5s to turn on or turn off
the auto clean function. When the auto clean func-
tion is turned on, indoor unit displays "CL" . During
the auto clean process of evaporator, the unit will
perform fast cooling or fast heating. There may be
some noise, which is the sound of flowing liquid or
thermal expansion or cold shrinkage. The air con-
ditioner may blow cool or warm air, which is a
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays indoor
ambient temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays outdoor
ambient temperature.
●
●
Bekijk gratis de handleiding van Gree GIC09UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GIC09UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5040 MB |
