Handleiding
Je bekijkt pagina 16 van 35
●
4.
drain hose
outlet pipe
1.
Add insulating pipe in the indoor drain hose in order
to prevent condensation.
The plastic expansion particles are not provided.
tape
NOTE
●
Step 7:
2
.
Connect wire of indoor unit
cable-cross
hole
power connection
wire
11
Step 6:
Install drain hose
1.
insulating pipe
insulating pipe
drain hose
pipe
2.
indoor unit.
Wrap the indoor pipe and joint of connection
pipe with insulating pipe, and then wrap it
with tape.
outlet
drain hose
Open the panel, remove the screw on the wiring
cover and then take down the cover.
Connect the drain hose to the outlet pipe of
Bind the joint with tape
Hex nut diameter
15~20
30~40
45~55
60~65
70~75
Tightening torque (Nm)
●
●
●
●
NOTICE
All wires of indoor unit and outdoor unit should be
If the length of power connection wire is insufficient,
connected by a professional.
please contact the supplier for a new one. Avoid e-
xtending the wire by yourself.
reachable after finishing installation.
For the air conditioner without plug, an air switch
must be installed in the line. The air switch should
be all-pole parting and the contact parting distance
should be more than 3mm.
For the air conditioner with plug, the plug should be
Make the power connection wire go through the
cable-cross hole at the back of indoor unit and
then pull it out from the front side.
panel
screw
wiring cover
Bekijk gratis de handleiding van Gree GIC09UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GIC09UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5040 MB |
