Graupner mz-16 HoTT handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Afdrukken

Je bekijkt pagina 28 van 48

Page 28 of 48 S1047.mz-16-V1.0-EN

The transmiƩer does not automaƟcally enable each bound receiver as part

of the channel count. This must be done manually in the RF Set menu. For

example, if RX1 is an 8-channel receiver it will serve only channels 1 to 8 on

that receiver. When a second 8-channel receiver is bound on RX2 it will

serve the exact same channels 1 to 8 on its receiver outputs providing you

with two receivers that mirror each other’s channel outputs.

To designate a receiver as a conƟŶƵĂƟon of the channel count of the

previous bound receiver you will need to reset the channel mapping in the

RF Set menu.

N

ote

You must verify that you are using the latest Įrmware on your receiver to

enable channel mapping or digital switches.

Channel Mapping

1. Go the RF Set menu and bind two receivers to bind posiƟons Rx1 and

Rx2.

2. Verify in the Rx column the channel count of the receiver and its

Įrmware version. For example, an 8-channel receiver will show as R8

and below it will show in small print the Įrmware version for example

7.06.0.

3. Tap on the Rx column of the second receiver to highlight it. The

background will turn to blue and tap again to bring the receiver

channel map dialog.

4. Tap on reset to renumber the channels for that receiver. The servo

map dialog will now show that the Įrst channel output on the

receiver is mapped to channel 9 and when scrolling the channel list

down you will noƟce that receiver output 8 is mapped to channel 16.

You can undo this operaƟon by tapping again on reset which restores

the channel numbering.

5. Tapping Ok will acƟvate the new channel mapping. It can be tested

by assigning a control in the Control Set menu for example to channel

16 and plugging in a servo on channel 8 of Rx2 to verify channel

operaƟon.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Bekijk gratis de handleiding van Graupner mz-16 HoTT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Gerelateerde producten van Graupner (Niet gecategoriseerd)

Handleiding bekijken

Graupner MC-32ex

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd