Gram KKI 8384-90 TI handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 32
11
INSTALLATION
Inside the packaging you will nd accessories necessary to connect the appliance to home electri-
cal system. Use the enclosed accessories to ensure the proper operation of the appliance. The
accessories include: Strain relief, bridge connection, 2 screws and connection terminal cover.
Install the strain relief using the provided screws.
Install the terminal cover by inserting it until it
snaps in place with a click.
In order to remove the cover, use a screw-
driver to pry the fastening tabs until the
cover pops o󰀨.
Assembly of the gasket
*Depending on the model, the seal is already installed at the factory (g.1)
If the seal has not been tted at the factory, proceed as follows:
Before installing the hob in the cut-out worktop, the gasket is to be attached to the back
of the hob (pic. 2)
To do this, rst peel o󰀨 the protective lm from the self-adhesive seal and glue the gasket
as close as possible to the outer edge of the hob (g. 3,4).
1 32
USZCZELKA
KLEJ
4
Do not install the appliance without the
foam gasket.
Then turn the hob over insert it into the cut-out of the
furniture. Align the positioning symmetrically so that the
distances between the hob and the countertop is the
same on all sides. (g. 5)
5

Bekijk gratis de handleiding van Gram KKI 8384-90 TI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGram
ModelKKI 8384-90 TI
CategorieFornuis
TaalNederlands
Grootte2254 MB