Handleiding
Je bekijkt pagina 12 van 28
12
INSTALLATION
Assembly of the gasket
Depending on the model, the seal is already installed at the factory (g.1)
If the seal has not been tted at the factory, proceed as follows:
Before installing the hob in the cut-out worktop, the gasket is to be attached to the back of
the hob (pic. 2)
To do this, rst peel o the protective lm from the self-adhesive seal and glue the gasket as
close as possible to the outer edge of the hob (g. 3,4).
1 32
USZCZELKA
KLEJ
4
Do not install the appliance without the
foam gasket.
Then turn the hob over insert it into the cut-out of the
furniture. Align the positioning symmetrically so that the
distances between the hob and the countertop is the
same on all sides. (g. 5)
5
Inside the packaging you will nd accessories necessary to connect the appliance to
home electrical system. Use the enclosed accessories to ensure the proper operation
of the appliance. The accessories include: Strain relief, bridge connection, 2 screws
and connection terminal cover.
Install the strain relief using the provided
screws.
Install the terminal cover by inserting it until
it snaps in place with a click.
In order to remove the cover, use a screwdriver to pry the fastening tabs until the
cover pops o.
Bekijk gratis de handleiding van Gram IN 6244 TI N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gram |
| Model | IN 6244 TI N |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2163 MB |
