Gram DSI 6300 handleiding
Handleiding
Je bekijkt pagina 25 van 31
EN - 22
1. Open the door and press Delay (5)
And Options (6) buttons simultaneously
for 3 seconds.
2. When sound setting is recognized,
buzzer gives a long sound and machine will
display last set level, from “S0” to “S3”.
3. To decrease sound level press Delay
button (5). To increase sound level, press
Options button (6).
4. To save the selected sound level, turn o
the machine.
’’S0’’ level means all voices are o. Factory
setting is “S3”.
Save Power Mode
To activate or deactivate Save Power
Mode, follow the below steps:
1.Open the door and press Half Load (4)
and Delay (5) buttons simultaneously for 3
seconds.
2.After 3 seconds, the machine will display
last Setting, “IL1” or “IL0”.
3.When Save Power Mode is activated,
“IL1” will be displayed. On this mode,
interior lights will turn o 4 minutes after the
door is opened, and the machine will turn
o after 15 minutes of no activity in order to
save energy.
4. When Save Power Mode is deactivated
“IL0” will be displayed. If Save Power Mode
is deactive, interior lights will be on as long
as the door is open, and the machine will
always be on unless it is turned o by user.
5. To save the selected setting, turn o the
machine.
In factory setting, Save Power Mode is
active.
Natural Ion Tech (Model Depending)
This function provides extra hygiene to the
machine thanks to Ion Technology. Natural
Ion Tech function is activated by pressing
Half Load (4) button for 3 seconds. At the
end of 3 seconds, “Ion” will be displayed
which indicates Ionizer function is activated.
The button is released after “Ion” is
displayed. If no intervention by user, 24
hour after activation of Ionizer function, it is
automatically cancelled.
NOTE: If machine is turned o, Ionizer
function is cancelled.
NOTE: Natural Ion Tech function does
not work with any program.
PureBeam & PureBeam+
(Model Depending)
This technology which have Ion and Light
Technology together, provides to extra
hygiene. It prevents bad odor during a
washing program that includes a drying
step.
PureBeam function is activated or
deactivated by pressing Half Load (4)
button for 6 seconds. At the end of 6
seconds, “UV1” will be displayed which
indicates PureBeam function is activated.
When it is deactivated, at the end of
6 seconds, “UV0” will be displayed.
PureBeam setting follows Natural Ion Tech
setting.
Default set is “UO”.
NOTE: If user do not deactivate
PureBeam function at the end of program,
it will remain active until the machine turns
off.
NOTE: If PureBeam or Ionizer
function is active, ionizer led lights up like
dimming during door is open.
Infoled 2.1 (Model Depending)
LED Indicator State of the Machine
Red, continuous
The machine is running a
program.
Red, ashing A program is cancelled.
Red, ashing
rapidly
The machine has a fault. Refer
to section "Automatic fault
warnings and what to do".
Green, continuous A program is nished.
Bekijk gratis de handleiding van Gram DSI 6300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gram |
| Model | DSI 6300 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4476 MB |
