Gourmia GVS1415 handleiding
Handleiding
Je bekijkt pagina 16 van 18
MAINTENANCE KIT INSTRUCTIONS
For customer service visit www.gourmia.com or call 888.552.003316
MAINTENANCE
MAINTENANCE KIT INSTRUCTIONS
Replacing the gasket:
1. Turn the switch to “O” and unplug the Power Cord from the outlet.
2. Make sure the machine is completely cooled o.
3. Open the Vacuum Lid.
4. Remove the gasket from the groove on the underside of the Vacuum Lid.
5. Remove the gasket from the groove in the Vacuum Chamber.
6. Set a new gasket on the groove in the Vacuum Chamber. Place the seal into the groove
with your ngers until its in place.
7. Position a new gasket into the groove in the Acrylic Vacuum Lid. Press the seal into the
groove with your ngers until its in place.
Replacing the Teon tape:
1. Turn the switch to “O” and unplug the Power Cord from the outlet.
2. Make sure the machine is completely cooled o.
3. Open the Vacuum Lid.
4. Peel either end of the Teon Tape covering the Seal Bar- Heating Element with a
ngernail or sharp-edged tool until it lis slightly. Grasp the loose end and slowly pull the
Teon Tape back until its fully removed.
6. Remove the backing from a new wide strip of Teon Tape for the Seal Bar- Heating
Element. make sure nothing attaches itself to the Teon Tape while the adhesive side is
exposed.
7. Stick the le end of the Teon Tape to the at area on the Plastic Vacuum Chamber just
le of the Seal Bar- Heating Element. Apply the Teon Tape from le to right over the Seal
Bar- Heating Element. Make sure there are no wrinkles or folds in the Teon Tape once
applied. e Teon Tape should fully cover the Seal Bar- Heating Element.
Bekijk gratis de handleiding van Gourmia GVS1415, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gourmia |
| Model | GVS1415 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3515 MB |
