Gossen Metrawatt ENERGYMID U2289 handleiding

Niet gecategoriseerd

Gossen Metrawatt

71 pagina's

PDF beschikbaar

Handleiding

SAFETY INSTRUCTIONS

5 | 71 ENERGYMID

1 SAFETY INSTRUCTIONS

General

 The instrument may only be used by qualified electricians in the commercial field.

 The instrument may only be used for the measurements described in the documentation for the instrument.

Work Performed on the Instrument

 Work performed on the instrument may only be carried out by a qualified electrician.

 Wear suitable and appropriate personal protective equipment (PPE) whenever working with the instrument.

 Observe and comply with all safety regulations which are applicable for your work environment.

 The respective system, as well as all connection cables and leads, must be voltage-free before any work is performed

on the instrument.

 Observe the five safety rules in accordance with DIN VDE 0105-100, Operation of electrical installations –

Part 100: General requirements.

(1. Shut down entirely. 2. Secure against restart. 3. Assure absence of voltage at all poles. 4. Ground and short circuit.

5. Cover neighboring live components, or make them inaccessible.)

Operation

 Only operate the instrument if it’s in good working order.

Inspect the instrument at regular intervals. Pay particular attention to damage.

 Connection cables and leads must be damage-free.

Inspect connection cables and leads at regular intervals. Pay particular attention to damage, interrupted insulation or

kinked cables.

 Use the accessories in undamaged condition only.

Inspect the accessories before use. Pay particular attention to damage.

 If the device or accessories are damaged during use, permanently remove the device/accessories from operation and

secure them against inadvertent use.

 If there are any signs of interior damage to the device or accessories (e.g. loose parts in the housing), permanently remove

the device/accessories from operation and secure them against inadvertent use.

 Equipment and accessories from Gossen Metrawatt GmbH are designed to function ideally with products from Gossen

Metrawatt GmbH which are specifically intended for this purpose. Unless expressly confirmed otherwise in writing by

Gossen Metrawatt GmbH, they are not intended or suitable for use with other products.

 If the instrument or its accessories don’t function flawlessly, permanently remove the instrument/accessories from oper-

ation and secure them against inadvertent use.

 Do not use the device and its accessories after long periods of storage under unfavorable conditions (e.g. humidity, dust

or extreme temperature).

 Do not use the device and its accessories after extraordinary stressing due to transport.

 Do not expose the instrument to direct sunlight.

 Only use the instrument and its accessories within the limits of the specified technical data and conditions (ambient con-

ditions, IP protection code, measuring category etc.).

 Do not use the instrument in potentially explosive atmospheres. Danger of explosion!

 Do not use the instrument in areas subject to the risk of fire. Danger of fire!

Emissions (feature W8 LPWAN only)

 This instrument is equipped with a radio interface supporting the LoRaWAN

protocol. Determine whether or not use of

the implemented ISM frequency band of 868 MHz is permissible in your country.

Data communication (feature W8 LPWAN only)

 The LoRaWAN

protocol permits configuration of the terminal device via the remote station. Ensure that the device is

not operated with parameters that could lead to a violation of applicable directives and/or regulations.

Read and follow these instructions carefully and completely

in order to ensure safe and proper use.

Keep for future reference.

Bekijk gratis de handleiding van Gossen Metrawatt ENERGYMID U2289, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.