Handleiding
Je bekijkt pagina 9 van 41
Appliances without faceted edges or decorative frames, are suitable for flush mounting.
CUT-OUTGLASS
Installation procedure
• The appliance may only be installed into a temperature- and water-resistant countertop, such as
a countertop made of natural stone (marble, granite) or solid wood (the edges along the cut-out
have to be sealed).
• When installing into a countertop made of ceramics, wood, or glass, a wooden sub-frame should
be used. The frame is not supplied with the appliance. The appliance may only be installed into
a countertop made of other materials after you have consulted the countertop manufacturer and
obtained his express approval.
• Internal dimension of the basic unit should be at least equal to the internal cut-out for the appliance.
This will allow simple removal of the appliance from the countertop.
1. First, feed the power cord through the cut-out.
2. Place the appliance over the centre of the
cut-out.
3. Connect the appliance to the power mains.
4. Test appliance operation.
5. Seal the slot between the appliance and the
countertop using a silicone sealant. The silicone
sealant used to seal the appliance has to be
temperature-resistant (to at least 160 °C).
6. Smooth out the silicone sealant using a
suitable tool. Do not switch on the appliance until
the silicone sealant has dried completely.
1. Silicone sealant
2. Sealing tape
9
Bekijk gratis de handleiding van Gorenje GI6443BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6443BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2976 MB |
