Handleiding
Je bekijkt pagina 36 van 41
9. Problems and errors
During the warranty period, only a service centre authorised by the manufacturer may carry out
any repairs.
Before making any repairs, make sure the appliance is disconnected from the power mains by
disconnecting the fuse.
Do not perform any unauthorised repairs to the appliance, as this may result in electric shock and a
short circuit hazard. Such work should be left to a professional or a service technician.
In case of minor issues with the operation of the appliance, refer to this manual to see if the problem
can be fixed by yourself.
Keep this user manual for future reference and pass it on to any subsequent owners or users of the
appliance.
Following is some advice on rectifying some common problems.
Cause of/rectifying a faultProblem/error
To troubleshoot the problem, check that you have the correct
input current limit set in the user settings (parameter). In the
event that the problem is still present, call a service
technician.
The main fuse in your home trips
often.
Water spilt over the sensor surface, or an object placed over
the sensors.
Wipe the sensor surface.
Audible signal and display
Clean the operating area of the appliance and dry it
completely. Remove any pans or plates. Allow the appliance
to cool. Disconnect the appliance from the power mains for
one minute (unscrew the fuse or switch off at the main power
switch).
Poor key responsiveness
The user interface is too hot to operate. Please wait for the
interface to cool down.
Hot
Appliance could not connect to the ConnectLife app or
disconnect from it. Try a factory reset.
Err
Internal fault in the electronics. Disconnect the appliance
from the power mains for one minute (unscrew the fuse or
switch off at the main power switch).
E20, E47, E48
Fault on the control interface. Clean the control interface
area and allow it to dry. Disconnect the appliance from the
power mains for one minute (unscrew the fuse or switch off
at the main power switch).
E42
Check that the appliance is properly connected to the power
mains and that all terminal contacts are properly screwed
in. Check whether the connected voltage is suitable.
E00, E01, E02, E03, E04, E05, E21
Insufficient cooling of the appliance. Check that the
appliance is installed according to the user manual.
E18
The cooking zone temperature is too high. Do not attempt
to heat empty pans.
E19
36
Bekijk gratis de handleiding van Gorenje GI6443BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6443BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2976 MB |
