Handleiding
Je bekijkt pagina 31 van 41
Table continued from last page
Connecting additional users:
To connect additional users, press and hold the key (between 7 and 10 seconds) until "PAr"
appears on the display unit. By releasing the key, a 3-minute timer appears. During this time,
additional users can be connected to the device using the ConnectLife app. After successfully
establishing the connection, the Wi-Fi symbol will stay on.
NOTE: To continue the set-up, follow the instructions in the ConnectLife app.
3.
Removing all connected users:
After long-pressing the key (between 10 and 13 seconds), UPr will appear on the display unit,
and a line will flash below the timer key. By pressing the timer, you activate the remove function.
When you enter the menu, a 1-minute timer is displayed, which is present until the connected
users are removed from the device. Use this setting to remove all connected users from the
ConnectLife app.
4.
Switching off the Wi-Fi module:
After long-pressing the key (between 13 and 16 seconds), "OFF" will appear on the display
unit. By releasing the key, the Wi-Fi module is switched off. After switching off the module, the
symbol goes out.
5.
6.22 Connecting an external hood - "Hob to Hood"
(depending on the model)
A connected appliance allows an external hood that is compatible with your appliance to be connected.
Check with the manufacturer for compatible hoods.
Switch on the user interface and make sure that the cooking zones are not active.
1. Switch on the Wi-Fi module (see chapter 5.18 Wi-Fi operation)
2. Before using the Hob to Hood function for the first time, the hob must be updated using the
ConnectLife app
3. To pair the devices, press and hold (between 7 and 10 seconds) until "PAr" appears on the
display unit. By releasing the key, a 3-minute timer appears. During this time, enable pairing on the
other device (see the instructions of the external hood). The devices are automatically connected.
4. After successfully establishing the connection, the symbol will stay on.
5. To disconnect the appliance from the hood, press and hold until the "UPr" menu appears,
and a line flashes below the timer key. By pressing the timer, you activate the remove function.
When you enter the menu, a 1-minute timer is displayed, which is present until the connected users
are removed from the device.
INFORMATION!
With the "UPr" function, you will also remove other connected users at the same time as the
hood.
31
Bekijk gratis de handleiding van Gorenje GI6443BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6443BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2976 MB |
