Handleiding
Je bekijkt pagina 30 van 34
8. TROUBLESHOOTING
The operation of your appliance can lead to faults and malfunctions. The following tables contain
possible causes and instructions for rectifying an error message or fault. It is recommended that you
read the following tables carefully to save time and money that a call to customer service can cost.
Problem Possible causes
What to do
The hob cannot be
switched on.
No power.
Make sure that the ceramic hob is connected to
the mains and switched on.
Check if there is a power cut in your house or
area. If you have checked everything and the
problem persists, call a qualified technician
The touch controls do
not respond.
The controls are locked. Unlock the controls. Refer to the "Using the
Cooktop" section for instructions
The touch controls are
difficult to operate.
There may be a light film of water
on the controls or you may be
touching the controls with your
fingertip.
Make sure the area around the controls is
dry and touch the controls with the pad of
your finger.
The glass is scratched. Coarse-edged cookware. Unsuitable,
abrasive scouring or cleaning agents
are being used.
Use cookware with flat and smooth bases. See
"Choosing the right cookware".
See "Cleaning and maintenance".
Some pans make
crackling or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals that
vibrate differently).
This noise is normal for cookware and does not
indicate a fault.
The induction hob
makes a low humming
noise when it is
operated at a high level.
This is due to the technology of
induction cooking
This is normal, but the noise should become
quieter or disappear completely if you reduce
the heat setting
Blowing noises from the
induction hob.
A cooling fan built into your induction
hob has switched on to protect the
electronics from overheating. It may
continue to run even if you have
switched off the induction hob
This is normal and does not require any
action. Do not switch the induction hob off at
the wall while the fan is running.
Pans do not get hot and
do not appear in the
display
The induction hob cannot recognise
the pan because it is not suitable
for induction cooking.
The induction hob cannot detect
the pan because it is too small for
the cooking zone or is not correctly
centred on the cooking zone.
Use cookware suitable for induction cooking.
See section "Choosing the right cookware".
Place the pan in the middle and make sure that
its base corresponds to the size of the cooking
zone
30
Bekijk gratis de handleiding van Gorenje GI6442BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6442BSCE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2860 MB |
