Gorenje GGI9B20S handleiding
Handleiding
Je bekijkt pagina 13 van 95
EN
12
Gas connection
Any work on the gas equipment and systems should be performed by the
authorized and competent persons
Prior to installation, che
ck that the local supply conditions (gas type and
gas pressure) are compliant with the product settings
LPG connection
Be careful that the gas hose and gas valve you use for your oven should be safe.
Attach the gas supply hose at the hose end being the oven and tighten by means of
clips and screw (Figure 6). Make sure it is tightened.
Gas hose of the oven should be me longer than 1500mm.
Pressure o
f the valve to be used for LPG should be 30 mbar- 300mmSS and
certificated.
Do not use an adjustable pressure reducing valve.
Gas supply hose should not pass thr
ough the hot section behind
the oven. Temperature of the gas hose should not exceed 90°C
Prior to use, make sure the system is gastight.
1- G1/2 Nipple (union)
2- Silicone gasket
3- G1/2 Hose inlet (gas inlet)
4- Metal clamp
5- Gas hose (inner diameter 8mm )
Figure 6
NG (natural gas) connection
1- G1/2 Nipple (union )
2- Silicone gasket
3- G1/2 NG hose ( natural gas hose as per EN
14800
)
If your equipment is set for natural gas, you should have it connected by an
installer registered with the natural gas distribution company. Natural gas
connection of your equipment is 1/2".
If you desire to convert your equipment from LPG to natural gas or from natural
gas to LPG, please call the nearest service center for gas conversion settings
Bekijk gratis de handleiding van Gorenje GGI9B20S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GGI9B20S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16691 MB |
