Handleiding
Je bekijkt pagina 19 van 24
18
GAS CONNECTIONS
FACTORY DEFAULT SETTINGS
• Gas appliances are tested and fitted with the sign.
• Has appliances are supplied sealed with burners adjusted to natural gas type H or E (20 or 25 mbar), or to liquefied
natural gas (50 or 30 mbar).
• The adjustment conditions for this appliance are stated on the label (or data plate).
• Before connecting the appliance, make sure the local requirements for connection (gas type and pressure) are
compatible with the appliance settings.
• If the gas you are using is not compatible with the current settings on your appliance, call a service technician or the
distributor.
• Modifying the hob to operate with a different type of gas requires replacement of the nozzles (see section NOZZLE
TABLE).
• In case of repairs or if the seal is damaged, the functional parts have to be tested and re-sealed in compliance with
the installation instructions. The functional parts include the following: fixed nozzle for large flame and adjustable
regulation screw for small flame.
CONNECTING TO GAS SUPPLY
• Appliance has to be connected to the gas mains or the gas cylinder according to the instructions of your local gas
distribution company.
• There is a gas connection plug on the right-hand side of the appliance, with external thread EN ISO 228-1 or EN
10226-1 / -2 (depending on the connection regulations in the respective country).
• A liquefied natural gas connection and a non-metal gasket are also supplied. (depending on the model)
• When connecting the appliance to the gas supply, the G 1/2 or R 1/2 part has to be held to prevent it from rotating.
(depending on the model)
• Use approved non-metal gaskets and approved sealants for sealing the connection joints. Only use each gasket
once. The thickness of flat non-metal gaskets may be deformed by up to 25%.
• Connect the appliance to the gas supply using a certified flexible hose. The hose should not touch the upper part of
the appliance.
Connection with a flexible hose
If the appliance is connected with a flexible hose, the path of the hose
indicated with "A" is not acceptable.
If a metal pipe is used, option "A" is permissible as well.
Gas connection plug
A Connection EN ISO 228-1
B Non-metal gasket, thickness 2 mm
C Hose plug for liquefied natural gas (depending on the connection
regulations in the respective country)
D Connection EN 10226-1 / -2 depending on the connection regulations
in the respective country).
Bekijk gratis de handleiding van Gorenje GG5A11WFFM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GG5A11WFFM |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3780 MB |
