Handleiding
Je bekijkt pagina 23 van 36
22
• Remove stubborn and burnt residues with a scraper. Be careful when handling the scraper
to prevent injury.
• Do not press the scraper perpendicularly against the glass and do not scratch the hob surface
with its tip or blade.
• Immediately remove any sugar or sugar-laden food from the glass ceramic hob using a
scraper, even if the hob is still hot, as sugar may permanently damage the glass ceramic
surface.
Only use the scraper when dirt cannot be removed with a wet cloth or special cleaners for glass ceramic surfaces.
Hold the scraper at the correct angle (45° to 60°). Gently press the scraper against the glass and slide it over the
signage to remove the dirt. Make sure the plastic handle of the scraper (in some models) does not come into contact
with a hot cooking zone.
Discolouration of the glass ceramic surface does not affect the operation or stability of the surface. Such
discolouration is most commonly a result of food residues burnt onto the surface, or it may be caused by some
cookware materials (such as aluminium or copper). Such discolouration is very difficult to remove entirely.
Note: Discolouration and similar flaws only affect the appearance of the hob and do not directly affect its function.
Removing such flaws shall not be covered by the warranty.
OVEN
Clean the oven walls with a damp sponge and detergent. To clean stubborn stains burned into the oven wall use a
special detergent for enamel. After cleaning carefully wipe the oven dry. Clean the oven only when it is completely
cold. Never use abrasive agents, because they will scratch enameled surface. Wash the oven utensils with a sponge
and detergent. You can also use special detergents to remove rough stains or burns.
AUTOMATIC OVEN CLEANING – PYROLYSIS
WARNING!
Before pyrolytic cleaning, wait for the oven to cool down and remove all equipment and accessories from it,
including the guides (depending on the model).
During the oven pyrolytic cleaning process, the induction hob must be switched off. When the pyrolytic cleaning
process is complete, the induction hob is locked. It has to be unlocked before the next use – see chapter “Child Lock“.
This function uses high temperature to simplify cleaning of the appliance interior and some of the supplied equipment
(all-purpose deep baking tray, shallow baking sheet).
During the cleaning process, fat residues and other impurities are incinerated and reduced to ashes.
There are three pyrolysis (cleaning intensity) levels available, with varying duration of the process:
Level
Cleaning intensity
Cleaning purpose
Program duration
1
Quick cleaning
For minor impurities
2 hours
2
Medium-intensity cleaning
For noticeable major impurities
2,5 hours
3
Intensive cleaning
For stubborn and persistent (older) impurities
3 hours
INFORMATION!
The more stubborn the dirt, the higher the level that should be selected.
Preparing for pyrolytic cleaning
• Remove all visible dirt and food residue from the oven cavity.
• Always remove the guides and all unnecessary equipment from the appliance.
• Always start the pyrolysis process when the appliance has cooled down.
Bekijk gratis de handleiding van Gorenje GEIT6E63XPG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GEIT6E63XPG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4701 MB |
