Handleiding
Je bekijkt pagina 16 van 60
WARNING!
Do not test correct operation when the appliance is on its underside. The appliance must be fully
installed when the extractor is tested.
Determining the electrical connection available in the house
INFORMATION!
Check the voltage. Before connecting the appliance, make sure the voltage specified on the
rating plate conforms to the voltage of your power mains. The voltage of your power mains
(220–240 V between L and N) should be checked by an expert using an appropriate measuring
device.
Check the voltages present as indicated in the diagrams below.
1 phase - 1 neutral2 phases - 1 neutral3 phases - 1 neutral
Attaching the power cord to the appliance
INFORMATION!
Refer to the wiring diagrams located at the bottom of the appliance.
1. Open the cover of the connection terminal box.
2. Run the power cord through a cord strain relief (clamp) which protects
the cable from being pulled out.
3. Connect the wires according to your type of appliance.
4. Make the necessary connections between the terminals using the
supplied terminal bridges. The terminal bridges are located in the
connection box.
16
Bekijk gratis de handleiding van Gorenje GEH8432B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GEH8432B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4942 MB |
