Handleiding
Je bekijkt pagina 10 van 28
9
ELECTRONIC PROGRAM TIMER
A Function selection knob
1 Oven delayed start
2 End oven operation
3 Minute minder
4 Time display
5 Clock
• Select the time settings by consecutively pressing the (A) knob. Selected symbol will flash on the display. Rotate
the (A) knob to set the function and press to confirm. Clock hands will automatically move to time display. The set
symbols will remain lit.
• Each time you press the (A) knob, this will be confirmed by a short acoustic signal.
• Press and hold the (A) knob for 2 seconds to delete the set function.
SETTING THE TIME OF DAY
• If the time display symbol (4) is flashing (after connecting the appliance for the first time or following a power failure),
press the (A) knob and hold it for two seconds until the flashing stops.
• Then select the time display (4) by consecutively pressing the (A) knob. Time display will flash when selected.
• Rotate the (A) knob to set the time.
• Confirm the setting by pressing the (A) knob again. If nothing is pressed, the setting will be stored automatically after
a few seconds.
OVEN OPERATION WITHOUT TIMER SETTINGS
• After connecting the appliance to the power mains for the first time or after a power supply failure, time display
symbol (4) will flash.
• In order for the oven to operate, press the (A) knob and hold it for two seconds. Time display will stop flashing.
• The oven can be used without restrictions if no timer settings are made.
OVEN OPERATION WITH PROGRAM TIMER SETTINGS
Program timer can be used to program oven operation in two ways:
• Setting the stop time - the oven will stop operating at the preset time.
• Setting delayed start - the oven will automatically start and stop operating at a preset time.
SETTING THE STOP TIME
This mode allows you to set the time at which you wish the oven to stop operating. The longest possible setting is 15
hours from the current time.
• Check if the clock is set accurately to current time.
• Select the (2) symbol by consecutively pressing the (A) knob until the symbol starts to flash.
• Rotate the (A) knob to set stop time.
• Confirm the setting by pressing the (A) knob again. Clock hands will move to time display. The oven stop symbol
will light up.
• Switch on the oven (use the oven knobs to set the operating mode and temperature). The oven will start operate at
the set time and stop and the selected stop time.
• When the clock reaches the selected stop time, the oven will be switched off, which will also be indicated by an
intermittent acoustic signal. The acoustic signal can be switched off by pressing the (A) knob; otherwise, it will switch
off automatically after 1 minute. The symbol (2) will flash. To continue cooking, press the (A) knob and hold it for 2
seconds, and set a new cooking time if necessary.
SETTING THE DELAYED START
This mode allows you to specify the time when the oven should start to operate (cooking start time) and the time when
you wish the cooking process to stop (end time). Stop time may be delayed by a maximum of 12 hours relative to the
current time of day; cooking duration may be set to a maximum of 3 hours.
• Check if the clock is set accurately to current time.
• Setting the start time: Select the (1) symbol by pressing the (A) knob. Rotate the (A) knob to set the start time and
confirm it by pressing the (A) knob. The symbol for the end of operation will start to flash (2).
Bekijk gratis de handleiding van Gorenje GECS6B70CLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GECS6B70CLB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3718 MB |
