Handleiding
Je bekijkt pagina 24 van 28
EN 24
CONVERSION INSTRUCTION
Converting by-pass screws
Depending on the gas type to which the appliances will be converted, there are two ways to
adjust the by-pass screws.
Please check the conversion table in the column “Modification”, if the by-pass screws have to be
screwed completely in (see action 3A below), replaced by a different by-pass screw (see action
3B below) or adjusted (see action 3C below).
The values are also indicated on the top of the by-pass screws.
The by-pass screws can be reached from the top of the hob when the knobs are removed
(B1 and B2).
3A. Screw the by-pass screws (3) of all gas taps completely in by using the flat-blade
screwdriver (T2).
3B. Remove the by-pass screws by using the flat-blade screwdriver (T2) and the nose pliers (T3).
Place the new by-pass screws with the nose pliers and screw the by-pass screws of all gas
taps in, by using the flat-blade screwdriver.
3C. Adjust the by-pass screws (3) of all gas taps by using the flat-blade screwdriver (T2) until a
stable flame is established with a minimal gas flow. Please check if the flame is stable in
cold and hot condition of the burner.
T2+T3
T2+T3
3
B1
B2
Bekijk gratis de handleiding van Gorenje GCE691BSC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GCE691BSC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2177 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Draaiknop |
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Gewicht | 10300 g |
