Gorenje G 600 handleiding
Handleiding
Je bekijkt pagina 19 van 76
For easier transport, some appliance parts have been packed separately and placed safely in the main packaging unit. //
Before first use, read and observe the instructions for assembly and safe use. The appliance is intended for household use,
specifically for dry vacuum cleaning.
PARTS
1
Vacuum cleaner
2
Suction tube
3
Telescopic tube
4
Floor brush
5
Small attachments
Optional attachments, depending on the model you selected at purchase
6
Small turbo brush for textile surfaces
7
Parquet brush
8
Hardfloor brush
ASSEMBLY
To connect the suction hose: insert the suction hose into the opening. // To disconnect the suction hose: press the
buttons on both sides of the suction hose and pull it out. // Connect the tube to the handgrip. // Attach the floor brush
to the tube.
OPERATING
1
On/Off button
2
Cord rewind button
3
Touch display (digital) for speed regulation // Press on the plus or minus on screen to increase or decrease
suction power // Small icons on the top of the screen offer the best performance for each surface.
USE
1
Telescopic tube // Press button to increase or decrease length of the tube. // Suction regulation // Open or
close small sliding button to regulate suction for different floors.
2
Universal floor brush suitable for all floor surfaces // Open or close the small sliding button to regulate suction
3
Small attachments so extra help at cleaning
Additional or optional attachments dependent on your model (check contents page)
4
Parquet brush
5
Turbo brush
6
Small turbo brush, suitable for vacuuming all textile surfaces. Gently remove debris from the roller to avoid
damaging the bristles.
BAGS, DUST BIN AND FILTERS
1
Replacing bags / Replacing the inlet filter
In the case of dust bags, they should be replaced once full. // Open the cover (by pressing the button). // Remove
the dust bag holder. // Remove the full dust bag. // Insert the new dust bag into the dust bag holder. // Insert the
dust bag holder into the lower housing. // Close the lid (you will hear a ‘click’) // Replace the motor protection filter
when inserting the first of a new set of dust bags. // Note that it is not possible to close the cover if no dust bag has
been inserted.
2
Replacing the outlet filter
Remove the holder. // Insert the bottom edge of the new filter properly into the ridges of the holder. // Close the
holder by pressing back into place gently. Make sure that the filter fits completely into the holder.
STORAGE
Switch the appliance off. // Remove the mains plug from the wall socket. // Rewind the mains cord by pressing the cord rewind
button. // Attach the lower tube to the vacuum cleaner.
TROUBLESHOOTING
Insufficient suction power?
Check dust bag (or dust container) and empty it. // Check if the nozzle, tube, or hose is blocked. // Remove any obstructions and
let the air flow through the hose and/or tube in the opposite direction.
19
Bekijk gratis de handleiding van Gorenje G 600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | G 600 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 7598 MB |
