Gorenje G 400 AIR handleiding
Handleiding
Je bekijkt pagina 21 van 84
For easier transport, some appliance parts have been packed separately and placed safely in the main packaging unit. //
Before first use, read and observe the instructions for assembly and safe use. The appliance is intended for household use,
specifically for dry vacuum cleaning.
PARTS
1
Vacuum cleaner
2
Suction tube
3
Telescopic tube
4
Floor brush
5
Additional accessories
Additional or optional attachments dependent on your model (check contents page)
Additional accessories
ASSEMBLY
To connect the suction hose: insert the suction hose into the opening. // To disconnect the suction hose: press the
buttons on both sides of the suction hose and pull it out. // Connect the tube to the handgrip. // Attach the floor brush
to the tube.
OPERATING
1
On/Off button
2
Cord rewind button
3
Manual speed regulation. // rotate button to increase or decrease suction power. // small icons on sides of
button offer the best performance for each surface.
USE
-
Telescopic tube // Press button to increase or decrease length of the tube.
-
Suction regulation // Open or close small sliding button to regulate suction for different floors.
-
Universal floor brush suitable for all floor surfaces // Open or close the small sliding button to regulate suction
-
Additional accessories
Additional or optional attachments dependent on your model (check contents page)
-
Long crevice nozzle
-
Small turbo brush, suitable for vacuuming all textile surfaces. Gently remove debris from the roller to avoid
damaging the bristles.
-
Parquet brush
-
Turbo brush
Bigger furniture nozzle
BAGS, DUST BIN AND FILTERS
1
Cleaning the dust container / Replacing the inlet filter
When the ‘dust container full’ indicator reaches the middle of the window, clean the dust container. // press on a
button directly under handle in pick up a dust container. // You can empty the dust container in the following ways:
Hold the dust container over a dustbin. Open the dust container // Shake the contents of the dust container into the
dustbin. // you can wash it, but make sure that it is completely dry before next use.
On the back side of dust bin is inlet filter. // take it out and clean it if needed. // if you see it is damaged replace it
immediately. // Do not use a washing machine to rinse filters. // Harsh or abrasive detergent will damage the outer
surface.
2
Replacing the outlet filter
Remove the holder. // Insert the bottom edge of the new filter properly into the ridges of the holder. // Close the
holder by pressing back into place gently. Make sure that the filter fits completely into the holder.
For best performance of vacuum cleaner, we recommend changing filters every 6 month. This way you prolong
lifetime of your product.
STORAGE
Switch the appliance off. // Remove the mains plug from the wall socket. // Rewind the mains cord by pressing the cord rewind
button. // Attach the lower tube to the vacuum cleaner.
TROUBLESHOOTING
Insufficient suction power?
Check dust bag (or dust container) and empty it. // Check if the nozzle, tube, or hose is blocked. // Remove any obstructions and
let the air flow through the hose and/or tube in the opposite direction.
21
Bekijk gratis de handleiding van Gorenje G 400 AIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | G 400 AIR |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 8164 MB |
