Handleiding
Je bekijkt pagina 7 van 68
GAS CONNECTION
The
oven is designed to operate with both natural gas (methane) and liquid gas (LPG), and can
be easily converted from one type to another following the instructions given in the relative section
of this booklet. Connection to the gas supply must be carried out by qualified technicians and in
conformance with the requirements.
If the appliance is to operate with gas bottles (LPG), a pressure regulator conforming to the
requirements.
RIGID PIPE CONNECTION
Connection to the mains gas supply may be made via a rigid pipe firmly attached to the fitting “G”,
or via a flexible stainless steel continuous-wall hose, conforming with a maximum length of 2
metres. The fitting “G” and seal “C” are supplied with the appliance, and comply with standards.
Important: Use two wrenches to turn the fitting “G” to the required position. When the fitting is in
the desired position, firmly tighten nut “A”.
WARNING - IMPORTANT:
after connecting the appliance to the gas supply (or to the liquid gas bottles) CHECK FOR LEAKS at the
union using a solution of soapy water (never use a naked flame).
:
7
Bekijk gratis de handleiding van Gorenje BOGX9832E06BG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | BOGX9832E06BG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7996 MB |
