Handleiding
Je bekijkt pagina 24 van 73

24
amount of mixture should not exceed the
maximum level as indicated on the jar.
NOTE: Never use hot liquids or run the appliance
empty.
Close the jar lid and measuring cup well in
position.The jar lid must be closed well in
position, or the appliance can not be activated.
Install the jar onto jar base, make sure that the
jar is installed well in position.
Connect the appliance with power source.
Turn the “Speed knob” to the speed settings
ranged between “Min” and “Max” at the “Speed
knob”, the light ring illuminates. And then the
appliance starts to work. Alternatively, you can
turn the “Speed knob” to “P” position to make the
appliance work under at a high speed.
NOTE: The buttons of “Smoothie”, “Auto clean”
and “Ice crush” are invalid when the appliance is
running under the selected speed setting or “P”
setting.
During working, you can remove the measuring
cup and then add ingredients into the jar through
the center opening of jar cover during operation,
and then replace measuring cup.
NOTE: You’d better not remove the jar from the
motor unit during working process. If it is
necessary to remove the jar, please firstly turn
off the appliance to make it stop working and
then remove it.
CAUTION: Do not operate the appliance for
more than 3 minutes per time and minimum 30-
minute rest time must be maintained between
continuous two cycles.
Turn the “Speed knob” to “OFF” position once
the mixture has been blended to your desired
consistency.
Unplug the appliance and then remove the jar
from the motor unit, carefully remove the jar
cover, then pour and serve.
CAUTION: The appliance must be unplugged
before removing the jar.
SMOOTHIE
Lay the appliance on a flat horizontal surface and
make sure it is unplugged and the “Speed knob”
turns to “OFF” position before operating.
Put the ingredients into the jar, make sure the
amount of ingredients should not exceed the
maximum level as indicated on the jar. Follow
the recipe as below to operate.
NOTE: Never use hot liquids or run the appliance
empty.
Close the jar lid and measuring cup well in
position. The jar lid must be closed well in
position, or the appliance can not be activated.
Install the jar onto jar base, make sure that the
jar is installed well in position.
Connect the appliance with power source.
Turn the “Speed knob” to “ON” position, and the
indicators of three buttons blink. And then press
“Smoothie” button, its corresponding indicator
lights solidly, then the appliance starts to work.
NOTE: The speed can not adjusted by the
“Speed knob” when the appliance is running
under the “Smoothie” mode.
NOTE: During the working process of making
smoothie, if you want to make the appliance stop
working, you can press “Smoothie” button again
or turn the “Speed knob” to “OFF” position.
During working, you can remove the measuring
cup and then add ingredients into the jar through
the center opening of jar cover during operation,
and then replace measuring cup.
NOTE: You’d better not remove the jar from the
motor unit during working process. If it is
necessary to remove the jar, please firstly turn
off the appliance to make it stop working and
then remove it.
CAUTION: Do not operate the appliance for
more than 3 minutes per time and minimum 30-
minute rest time must be maintained between
continuous two cycles.
After finish making smoothie, the appliance will
stop working automatically and the indicators of
three buttons will turn to blink.
Unplug the appliance and then remove the jar
from the motor unit, carefully remove the jar
cover, then pour and serve.
CAUTION: The appliance must be unplugged
before removing the jar.
ICE CRUSH
Lay the appliance on a flat horizontal surface and
make sure it is unplugged and the “Speed
knob” turns to “OFF” position before operating.
Make the jar be dried naturally and prepare 8
pieces of solid ice cubes with a size of
15mm*15mm*15mm, then remove the
measuring cup and jar lid, after it, put the ice
cubes into the jar. Usually certain amount of
purified water has to be added to facilitate the
smooth running of appliance. The proportion of
the ice and water is 2:3. The amount of mixture
should not exceed the maximum level as
indicated on the jar. Follow the recipe as below
to operate.
Close the jar lid and measuring cup well in
position. The jar lid must be closed well in
position, or the appliance can not be activated.
Install the jar onto jar base, make sure that the
jar is installed well in position.
Connect the appliance with power source.
Turn the “Speed knob” to “ON” position, and
the indicators of three buttons blink. And then
press “Ice crush” button, its corresponding
indicator lights solidly, then the appliance starts
to work.
Bekijk gratis de handleiding van Gorenje B1400E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | B1400E |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 12368 MB |





