Goodwe GW6000-ET handleiding
Handleiding
Je bekijkt pagina 18 van 158
18
3.3 Supported Grid Types
3.4 System Working Mode
Self-use Mode
Self-use mode is the basic working mode of the system.
When the power generated in the PV system is sufficient, it will supply the loads in priority. The excess
power will charge the batteries first, then the remaining power will be sold to the utility grid. When the
power generated in the PV system is insufficient, the battery will supply the loads in priority. If the battery
power is insufficient, the load will be powered by the utility grid.
Back-up mode
The back-up mode is mainly applied to the scenario where the grid is unstable.
When the grid is disconnected, the inverter turns to off-grid mode and the battery will supply power to the
BACK-UP loads; when the grid is restored, the inverter switches to grid-tied mode.
The battery will be charged to preset SOC protection value by utility grid or PV when the system is
running on-grid. So that the battery SOC is sufficient to maintain normal working when the system is off-
grid. The purchase of electricity from the power grid to charge the battery must comply with local laws
Bekijk gratis de handleiding van Goodwe GW6000-ET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW6000-ET |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28888 MB |
