Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 78 van 127
10 Technical Data
74
No. Fault Cause Solutions
53
PV Hardware Over-
current
Sun light is weak
or changing
abnormally.
Disconnect the AC output switch
and DC input switch, then
connect them 5 minutes later.
Contact the dealer or the af-
ter-sales service if the problem
persists.
54
PV Software Over-
current
55 PV HCT Failure
Abnormal boost
current sensor
Disconnect the AC circuit
breaker and DC input switch,
then connect them 5 minutes
later. Contact the dealer or the
after-sales service if the problem
persists.
56
Cavity
Overtemperature
1, The inverter
is installed in a
place with poor
ventilation.
2, The ambient
temperature
exceeds 60℃.
A fault occurs in
the internal fan
of the inverter.
1.Check the ventilation and the
ambient temperature at the
installation point.
2.If the ventilation is poor or the
ambient temperature is too
high, improve the ventilation
and heat dissipation.
3, Contact the dealer or af-
ter-sales service if both the
ventilation and the ambient
temperature are proper.
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
