Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 56 van 127
06 Electrical Connection
52
Step 1 Prepare the communication cable.
Step 2 Disassemble the communication connector.
Step 3-4 Connect the communication cable to the communication terminal
and fasten it.
Step 5 Connect the communication terminal to the inverter.
Step 6 Install the Smart Dongle.
Closing the Terminal Resistance DIP Switch
Some models of inverters are equipped with RS485 terminal resistors, and the dip switch for this
terminal resistor is turned on by default. 'ON' represents on, '1' represents o. Operation method:
Open the outer cover of the communication port, and use an insulated paddle to turn the termi-
nal resistance dip switch to "1" (OFF).
ON
OFF
ON
1
ON
OFF
ON
1
Set the Terminal
Resistor to OFF
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
