Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 35 van 127
06 Electrical Connection
31
6.3 Connect the AC Output Cable
WARNING
• The PE cable connected to the enclosure of the inverter cannot replace
the PE cable connected to the AC output port. Make sure that both of the
two PE cables are securely connected.
• Make sure that all the grounding points on the enclosures are
equipotential connected when there are multiple inverters.
• To improve the corrosion resistance of the terminal, you are
recommended to apply silica gel or paint on the ground terminal after
installing the PE cable.
• PE cable should be prepared by customers.
WARNING
• Do not connect loads between the inverter and the AC circuit breaker
directly connected to the inverter.
• The Residual Current Monitoring Unit (RCMU) is integrated into the
inverter. The inverter will disconnect the utility grid rapidly once it detects
any leak current over the permissible range.
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
