Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 27 van 127
04 Check and Storage
23
If the inverter is not to be installed or used immediately, please ensure that the storage
environment meets the following requirements:
1. Do not unpack the outer package or throw the desiccant away.
2. Store the equipment in a clean place. Make sure the temperature and humidity are
appropriate and no condensation.
3. The height and direction of the stacking inverters should follow the instructions on
the packing box.
4. The inverters must be stacked with caution to prevent them from falling.
5. If the inverter has been stored for more than two years or has not been in operation
for more than six months after installation, it is recommended to be inspected and
tested by professionals before being put into use.
6. To ensure good electrical performance of the internal electronic components of the
inverter, it is recommended to power it on every 6 months during storage. If it has
not been powered on for more than 6 months, it is recommended to to be inspected
and tested by professionals before being put into use.
Inverter x 1
Expansion bolts
x N
3]
Mounting plate x 1
[1]
DC connector
x N
[2]
Grounding OT
Terminals x 1
PIN Terminals
x N
[4]
AC OT
Terminal
x N
[7]
AC Terminal Shield x 1 2PIN com-
munication
terminals
x N
[4]
3PIN
communication
terminals x N
[4]
DRED/RCR
communication
terminals x N
[4]
Smart dongle x 1
[5]
Documents x 1
protection cover x N
[6]
4PIN
communication
terminals x N
[4]
6PIN
communication
terminals x 1
[4]
4�3 Storage
Wire harness and
protective cover
support plate xing
cable ties x N
[8]
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
