Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 25 van 127
03 Product Introduction
21
Indicator Status Explanation
STEADY ON: EQUIPMENT POWER ON
OFF: OFF = EQUIPMENT POWER OFF
STEADY ON: THE INVERTER IS FEEDING POWER
OFF: THE INVERTER IS NOT FEEDING POWER
SINGLE SLOW BLINKING: SINGLE SLOW BLINKING =
SELF CHECK BEFORE CONNECTING TO THE GRID
SINGLE FAST BLINKING: SINGLE FAST BLINKING =
CONNECTING TO THE GRID
STEADY ON: STEADY ON= WIRELESS IS
CONNECTED/ACTIVE
SINGLE BLINKING: SINGLE FAST BLINKING=
WIRELESS SYSTEM IS
RESETTING
BLINK 2: BLINK 2 = WIRELESS IS NOT CONNECTED
TO ROUTER OR BASE STATION
BLINK 4: BLINK 4 = NOT CONNECTED TO MONITOR-
INGSERVER
BLINKING: BLINKING = RS485 IS CONNECTED
OFF: OFF = WIRELESS IS RESTORING FACTORY
DEFAULT SETTING
STEADY ON: STEADY ON = A FAULT HAS OCCURRED
OFF: OFF = NO FAULT
3.6.4 Nameplate
GW trademark, product
type, and product model
Technical parameters
Safety symbols and
certication marks
Contact information and
serial number
The nameplates are for reference only. The actual interface prevails.
4 Check and Storage
4.1 Check Before Receiving
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
