Goodwe GW30K-ET handleiding
Handleiding
Je bekijkt pagina 6 van 184
6
2.3 System Installation
DANGER
All operations such as transportation, storage, installation, use and maintenance shall
comply with applicable laws, regulations, standards and specifications.
To protect the equipment and components from damage during transportation, ensure
that the transportation personnel are professionally trained. All operations during the
transportation have to be recorded. The equipment shall be kept in balance, thus avoiding
falling down.
The equipment is heavy. Please equip the corresponding personnel according to its
weight, so that the equipment does not exceed the weight range of the human body can
carry, and cause personnel injury.
Keep the equipment stable to avoid dumping, which can result in equipment damage and
personal injuries.
The equipment must be installed on a concrete or other non-combustible surface. Ensure
that the foundation is level, firm, flat, dry, and no depressions or slopes. The foundation
should also be sturdy enough to bear mechanical load.
Disconnect the upstream and downstream switches to power off the equipment before
any electrical connections. Do not work with power on. Otherwise, an electric shock may
occur.
Install a breaker at the voltage input side of the equipment to prevent personal injury or
equipment damage caused by energized electrical work.
Perform electrical connections in compliance with local laws, regulations, standards and
specifications. Including operations, cables, and component specifications.
Connect cables using the connectors included in the package. The manufacturer shall not
be liable for equipment damage if other connectors are used.
Ensure all cables are connected tightly, securely, and correctly. Inappropriate wiring may
cause poor contacts and damage the equipment.
Ensure that the system is securely grounded before operations. Otherwise, an electric
shock may occur.
Ensure that the equipment is not damaged and the system is not faulty before any
operations. Otherwise, fire or electric shock may occur.
Do not open the cabinet door or touch any terminals or components while the equipment
is working. Otherwise, an electric shock may occur.
Do not touch running equipment as its temperature may exceed 60℃ and result burning
harm. Do not install equipment within reach of non-professionals.
Do not wear any metal thing when moving, installing, or commissioning the equipment.
Otherwise, it will cause electrical shock or damages to the equipment.
Do not put any metal parts on the equipment, otherwise it will cause electrical shock.
WARNING
Do not apply mechanical load to the terminals, otherwise the terminals can be damaged.
If the cable bears too much tension, the connection may be poor. Reserve a certain length
of the cable before connecting it to corresponding ports.
Tie the cables of the same type together, and place cables of different types at least 30mm
Bekijk gratis de handleiding van Goodwe GW30K-ET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW30K-ET |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 40461 MB |
