Goodwe GW30K-ET handleiding
Handleiding
Je bekijkt pagina 15 van 184
15
above
Smart
Meter
GM3000
GM330
GMK330
GM3000: Supplied with Inverter, CT cannot be
replaced, CT ratio: 120A/40mA
GM330: CT can be sourced from GoodWe or
purchased separately, with a CT ratio
requirement of nA/5A.
nA: CT primary side input current, with n
ranging from 200-5000
5A: CT secondary side output current
GMK330: CT shipped with the meter, CT ratio:
120A: 40mA
200A: 50mA (Brazil only)
smart
dongle
WiFi/LAN Kit-20
Wi-Fi Kit
LS4G Kit-CN, 4G Kit-CN, 4G
Kit-CN-G20, or 4G Kit-CN-G21
(China only)
Ezlink3000
For single-unit operation, please use the
WiFi/LAN Kit-20, Wi-Fi Kit, LS4G Kit-CN, 4G
Kit-CN, 4G Kit-CN-G20, or 4G Kit-CN-G21
module. If replacing the Wi-Fi Kit with the
WiFi/LAN Kit-20, ensure to upgrade the
InverterARM firmware to version 08.401 or
above before switching to the WiFi/LAN
Kit-20.
During parallel operation, only the Master
inverter needs to be connected to the
Ezlink3000, while the Slave inverter does not
require connection to the smart dongle.
The firmware version of Ezlink3000 is 04 or
above.
3.2 Product Overview
3.2.1 Inverter
Inverters control and optimize the power in PV systems through an integrated energy
management system. The power generated in the PV system can be used, stored in the battery,
output to the utility grid, etc.
Bekijk gratis de handleiding van Goodwe GW30K-ET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW30K-ET |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 40461 MB |
