Goodwe EzLogger3000C handleiding
Handleiding
Je bekijkt pagina 18 van 135
05 Installation
13
User Manual V1.2-2025-04-15
The following tools are recommended when installing the equipment. Use other auxiliary tools
on site if necessary.
Installation Tool Requirements
Goggles
Safety shoes
Safety gloves
Dust mask
Diagonal pliers
Wire stripper Hammer drill
Marker Level
Heat shrink tube Rubber hammer
Vacuum cleaner
Torque wrench
Cable tie
5.2 EzLogger Installation
5.2.1 Wall-Mounting
NOTICE
• Avoid the water pipes and cables buried in the wall when drilling holes.
• Wear goggles and a dust mask to prevent the dust from being inhaled or contacting eyes
when drilling holes.
• For easy connection and maintenance, ensure that the cable connection area of the EzLog-
ger is accessible.
Step 1 Mark positions for drilling holes. Ensure that the marked holes match the mounting
holes on the back of the equipment.
Step 2 Drill holes to a depth of 30mm using the hammer drill. The diameter of the drill bit
should be 6mm.
Step 3 Install the expansion screws, leaving a length of 1.5-2mm outside the wall to hang the
equipment.
Step 4 Hang the equipment to the expansion screws and pull it down to ensure that equipment
is mounted securely.
M3/4
Bekijk gratis de handleiding van Goodwe EzLogger3000C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | EzLogger3000C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18464 MB |
