Golden Lighting Ella 1323-M3 handleiding
Handleiding
Je bekijkt pagina 1 van 2
Assembly Instructions: 1323-SF/M3 (Ella)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
For Customer Service, please
contact the place of purchase.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit
breaker and completely remove the old xture from the
ceiling, including the old mounting strap.
1. Mounting strap (A) contains several pairs of threaded holes.
Find the pair of holes that matches the spacing of the holes on
thejunctionboxandyourxture’sbackplate.Keepinmindthat
youwillneedtolineupthekeyholesofmountingstrap(A)with
the holes in canopy (D).
2.Pullthehouse’swiresthroughthecenterofmountingstrap
(A). Place mounting strap (A) over the junction and secure
mounting strap (A) to the junction box with mounting screws
(B) and a screwdriver. Tighten the screws securely. Assemble
canopy (D,E,F) by securing the parts together onto canopy
post (I) using washers (W and H) and nut (G). Twist canopy post
(I)ontopost(V)toconnectthecanopyandxture.
CONNECTING THE WIRES
3.Haveanassistantsupportthextureweightwhile
completing the wiring. Cut away excess wire. Attach the
xture’swirestothepowersupplywiresfromthejunction
box.Connectblacktoblack(orsmooth);whitetowhite(or
ribbed);groundtoground(greenorcopper).Twisttheendsof
thewirepairstogether,thentwistonawireconnector.Make
sure all twists are in the same direction. If there is no ground
wire (green or copper) from the junction box, locate ground
screw(E)onthemountingstrapandwrapthextureground
wire around the green ground screw (E). Use a screwdriver to
securegroundscrew(E)ontothemountingbracket.Tuckall
wires neatly into the junction box.
Please note that this xture may be hung as
a pendant or a semi-ush. Please decide how
you would like the xture to be installed and
refer to the related instructions.
FINISHING THE INSTALLATION
4.Raisecanopy(D,E,F)uptomountingstrap(A).Matchthelocationsoftheholesinthecanopytothekeyholesonmountingstrap(A).
Securecanopy(D,E,F)inplacebythreadingdecorativescrews(C)intothekeyholesonthesidesofmountingstrap(A).Carefullyi
nstall
lightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
5. Refer to the crystal installation sheet and carefully hang crystal strands (O) and (P) as depicted.
6.Arms(L)arenotattachedtothexture’sbody.Threaddecorativescrews(M)intobothposts(N).Threaddecorativenuts(Q)into
bottomcap(R).AttachtheAAcrystaldrop(T)tonial(S).
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
FLUSH INSTALLATION
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
Please note that there are two different mounting straps included
with the xture. In this conguration, please use the round
mounting strap. Note: post (V) connects directly to canopy post
(I). For pendant installation, please ip the page and review the
diagram for more information).
O
P
R
V
U
S
T
Q
L
N
M
A
C
D
C
B
F
E
I
G
H
W
Bekijk gratis de handleiding van Golden Lighting Ella 1323-M3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Golden Lighting |
| Model | Ella 1323-M3 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 541 MB |
