Handleiding
Je bekijkt pagina 8 van 16
Assembly and Installation
WALL MOUNTED
1. Make sure the appliance is unplugged and power switches are off.
2. Position the panel appliance within one metre of a wall socket. Do not mount in
front of or below the wall socket.
3. Ensure there is at least 1m clearance from the top and 100mm on the sides and
the bottom of the appliance.
4. Assemble the bracket with the screws provided – see image 1.
5. Position the mounting screws on the wall per below mounting guide and check
they are horizontal with a spirit level. Ensure the bottom of the heater is at least
100mm from the floor and drill holes as required. Fix the bracket to the wall.
6. Slot the back of the appliance onto the mounting screws. The bottom mount is on
there to keep the heater at the correct distance from the wall. You do not need to
put a screw in the bottom mount.
7. Plug appliance into a standard 240 volt AC electrical outlet.
NOTE: Your Goldair Panel Heater should be installed with at least 100mm clearance from the
floor and any other surrounding parts including other appliances, side walls and soft
furnishings. There must be at least 1m clearance from the top of the heater to ceilings or
shelves.
WARNING: Do not run the power cord behind the heater.
WALL MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON WALLS THAT
COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING REGULATIONS
Bekijk gratis de handleiding van GoldAir Platinum GPPH220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GoldAir |
| Model | Platinum GPPH220 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2087 MB |
